Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black sector-shaped graphics card fan with two-pin power connector

OEM Industries

OEM Industries MGA6012YF-O15 12V 0.37A sector-shaped VGA fan CPU cooler

SKU CH-72JV-KRXQC

Sector-shaped 12 V 0.37 A fan with ball bearing and 2-pin connector cools graphics cards

  • ColorBlack
  • TypeFan only
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Sector shape targets tight GPU spaces
  • Ball bearing reduces wear for longer life
  • 12 V .37 A draws minimal power
  • Two-pin connector fits legacy headers
  • Fan-only design keeps weight low

Sector-shaped VGA fan for graphics card cooling

This OEM Industries MGA6012YF-O15 is a 12 V, 0.37 A sector-shaped fan designed to mount directly on a graphics card cooler. It suits builders replacing a worn original fan or fitting a custom shroud where a standard square frame will not fit. The two-pin connector provides power without speed reporting or PWM control.

Two-pin power limits speed control and monitoring

The 2-pin connector supplies 12 V at 0.37 A but carries no tachometer or PWM signal. Motherboard or GPU fan headers cannot read RPM or adjust duty cycle, so the fan runs at full voltage whenever powered. Builders needing automatic speed curves or failure alerts must add external monitoring hardware.

Simple two-wire install but check mounting holes

Installation requires connecting the two wires to a 12 V source and securing the sector-shaped frame to the heatsink. The unusual outline means standard screw patterns rarely align; verify hole spacing and clearance against the PCB before ordering. Ball bearings tolerate orientation changes but offer no protection against dust ingress.

Privalumai

  • Sector shape targets tight GPU spaces
  • Ball bearing reduces wear for longer life
  • 12 V .37 A draws minimal power
  • Two-pin connector fits legacy headers
  • Fan-only design keeps weight low

Specifikacijos

ModelMGA6012YF-O15
ColorBlack
TypeFan only
Bearing TypeBall
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

Should I pick the MGA6012YF-O15 or another version for my graphics card?

The MGA6012YF-O15 is a single sector-shaped VGA fan; choose it when your cooler needs this exact model and a 2-pin 12 V 0.37 A connector

What does the 12 V 0.37 A rating mean once the fan is installed?

It draws 0.37 A at 12 V, so the card's fan header must supply at least that current for the ball-bearing motor to run at full speed

How does the 2-pin connector limit control of this cooler?

A 2-pin header provides power only, so speed is fixed at the rated voltage; no PWM or voltage regulation is possible through this interface

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.