Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 120mm blower fan with three bare wires

OEM Industries

OEM Industries NIDEC 12032 A34886-58PW 24V .6A 120mm blower fan

SKU CH-N5ED-HTK1B

A 120 mm blower fan runs on 24 V and 0.6 A with a three-wire lead and ball bearing

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeBall
  • Power Connector3 Wires
  • LEDNo
  • Blower design directs airflow through tight heatsink fins
  • NIDEC 12032 motor built for continuous 24V operation
  • 120mm frame fits standard 120mm mounting points
  • Ball bearing reduces friction for longer service life
  • Three-wire lead enables speed monitoring and PWM control

OEM Industries NIDEC 12032 Blower Fan

This 120mm blower fan is built for directed airflow in tight enclosures. It suits technicians replacing a specific OEM cooling module or builders needing focused exhaust. The unit arrives new without a fitted connector, ready for custom wiring.

24V .6A Three-Wire Power Specification

The fan operates at 24 volts and draws .6 amps through a three-wire lead. This exact voltage and current rating decides whether the part matches the original equipment. Verify the target device supplies 24V before purchase.

Ball Bearing Durability and Airflow Limits

Ball bearing construction supports continuous duty in industrial or server chassis. The blower design pushes air through restricted channels such as heatsink fins or ducting. It is not suited for open-case cooling where static pressure is low.

Privalumai

  • Blower design directs airflow through tight heatsink fins
  • NIDEC 12032 motor built for continuous 24V operation
  • 120mm frame fits standard 120mm mounting points
  • Ball bearing reduces friction for longer service life
  • Three-wire lead enables speed monitoring and PWM control

Specifikacijos

ModelA34886-58PW
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeBall
Power Connector3 Wires
LEDNo

Klausimai apie šią prekę

What does the 24V 0.6A rating mean when the fan is installed in a system?

The blower draws up to 0.6 amps on a 24 volt rail, so the power source must deliver that current steadily for reliable operation.

How does the three-wire lead affect speed control and monitoring?

The three wires provide power, ground and a tachometer signal, allowing the motherboard or controller to read fan speed but not to vary voltage via PWM.

What clearance and mounting points does the 120mm blower need?

The unit fits a standard 120 mm fan frame and mounts with four corner screws; allow space for the blower outlet to exhaust air without obstruction.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.