Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black diamond-shaped graphics card fan with two wires and a two-pin connector

OEM Industries

OEM Industries PLA04710S12M 12V .09A diamond-shaped graphics card fan

SKU CH-CJ26-Z3N99

Diamond-shaped graphics card cooler with a 12 V .09 A sleeve-bearing fan and two-pin power connector

  • ColorBlack
  • TypeFan only
  • Bearing Typesleeve bearing
  • Power Connector2 Pin
  • LEDNo
  • Low power draw extends battery life in portable builds
  • 12 V .09 A spec matches legacy GPU coolers
  • Two-pin connector fits older graphics cards directly
  • Sleeve bearing runs quietly at low RPM
  • Diamond frame aligns with vintage VGA mounting holes

Direct GPU replacement

This diamond-shaped fan mounts directly onto a graphics card heatsink where the original cooler has failed or become noisy. It suits repair technicians and owners of older boards who need a 12 V, 0.09 A two-pin replacement without rewiring the power header.

Sleeve-bearing thermals

The sleeve bearing keeps running noise low during typical desktop loads while drawing only 0.09 A from the 12 V rail. Heat dissipation matches the original specification so the card stays within its thermal envelope without extra case airflow.

Two-pin simplicity

A black two-wire, two-pin connector plugs straight into the existing GPU fan header, requiring no adapters or software control. The package contains only the fan itself, so builders must reuse the original mounting screws and shroud.

Privalumai

  • Low power draw extends battery life in portable builds
  • 12 V .09 A spec matches legacy GPU coolers
  • Two-pin connector fits older graphics cards directly
  • Sleeve bearing runs quietly at low RPM
  • Diamond frame aligns with vintage VGA mounting holes

Specifikacijos

ModelPLA04710S12M
ColorBlack
TypeFan only
Bearing Typesleeve bearing
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

How do I fit the PLA04710S12M diamond-shaped fan onto my graphics card and which step is often missed?

Align the diamond mounting holes with the card's screw pattern, connect the 2-pin power header, then secure all four corners; the step often missed is checking that the sleeve bearing spins freely before final tightening.

What maintenance will the PLA04710S12M sleeve-bearing fan need later?

The sleeve bearing cannot be relubricated easily; once noise or vibration appears, replace the entire fan unit rather than attempting bearing service.

At 12 V and .09 A, what limit shows up first during sustained use?

The low current draw means limited airflow, so rising GPU temperature is the first limit you will hit under continuous load.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.