Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 80mm ball-bearing CPU fan with two-wire 2-pin connector

OEM Industries

OEM Industries RDM8025B 80mm ball-bearing fan 5V .28A 2-pin CPU cooler

SKU CH-5EBV-KF4X4

An 80 mm ball-bearing CPU cooler fan running at 5 V and .28 A with a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size80mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • 80 mm frame fits tight chassis spaces
  • dual ball bearings extend operating life
  • 5 V .28 A draw keeps power use low
  • two-pin connector simplifies motherboard hookup
  • black 8025 design suits clean case builds

80 mm ball-bearing CPU fan

This 80 mm fan fits standard CPU cooler mounts and draws 0.28 A at 5 V through a 2-pin connector. The dual ball bearing design reduces wear in continuous operation. No LED lighting is included so the unit stays visually neutral inside any chassis.

Builders replacing an 80 mm cooler fan

The 2-pin power connector suits motherboards or fan controllers that provide basic voltage control without PWM signalling. Systems that require a 3-pin or 4-pin header for speed reporting or automatic curves cannot use this unit directly. Buyers who need variable speed feedback should look at a different connector type.

5 V 0.28 A power specification

The fan operates at 5 V and draws 0.28 A, so the header or controller must supply at least that current at the rated voltage. Exceeding the voltage or using a supply that cannot deliver the required amperage will prevent the fan from starting or cause unstable rotation. Match the power source to these exact figures before installation.

Privalumai

  • 80 mm frame fits tight chassis spaces
  • dual ball bearings extend operating life
  • 5 V .28 A draw keeps power use low
  • two-pin connector simplifies motherboard hookup
  • black 8025 design suits clean case builds

Specifikacijos

ModelRDM8025B
ColorBlack
TypeFan only
Fan Size80mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Klausimai apie šią prekę

What 5 V header with a two-pin connector must the motherboard provide for the RDM8025B?

The motherboard needs a standard 5 V two-pin fan header to supply the .28 A current this 80 mm ball-bearing cooler draws.

Will the two-pin RDM8025B run at full speed on an older board that only offers three-pin headers?

Yes — the two-pin plug fits a three-pin header and the fan will spin at its fixed 5 V speed, but the board cannot monitor its RPM.

How can I confirm the RDM8025B is spinning correctly after installation?

Visually check that the 80 mm blades turn smoothly and listen for the quiet ball-bearing operation; the two-pin design gives no RPM signal to software.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.