Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two green 240-pin DDR3 ECC registered DIMMs with black chips

OWC

OWC 16GB DDR3 1333 CL9 ECC Registered RDIMM 2Rx4 1.5V 240-pin Kit

SKU CH-EXRR-3DVJ8

16 GB DDR3 ECC registered RDIMM kit for Supermicro SuperServer 6016 and 6026 series

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands Supermicro SuperServer capacity
  • DDR3 1333 CL9 at 1.5 V matches JEDEC spec
  • 240-pin 2Rx4 RDIMM fits 6016T, 6016TT, 6016XT, 6026T, 6026TT series
  • Replaces Supermicro MEMDR380L part numbers for direct upgrade

Server ECC Registered Upgrade

This 16GB kit delivers two 8GB DDR3 1333 CL9 registered DIMMs built for Supermicro SuperServer 6016 and 6026 series platforms. ECC and registered signalling protect data integrity in multi-socket workloads. The modules run at 1.5V and fit 240-pin slots without heat spreaders. Desktop boards and unbuffered memory are not compatible.

Thermals Noise and Power Draw

Bare green PCBs rely on chassis airflow; no onboard fans or spreaders add noise. Each module draws standard DDR3 1.5V current under typical server loads. Registered buffering adds negligible latency while stabilising the memory bus across all populated slots.

Replaces Supermicro MEMDR380 Modules

This kit replaces Supermicro part numbers MEMDR380LCL01ER13, MEMDR380LHL01ER13, MEMDR380LHL03ER13, MEMDR380LHV01ER13, MEMDR380LSL02ER13 and MEMDR380LSL06ER13. The upgrade is worth it when expanding capacity beyond factory limits or refreshing ageing sticks that show correctable errors. Builders needing unbuffered DIMMs or non-ECC memory should look elsewhere.

Privalumai

  • ECC registered design protects data integrity in servers
  • 16 GB kit (2 × 8 GB) expands Supermicro SuperServer capacity
  • DDR3 1333 CL9 at 1.5 V matches JEDEC spec
  • 240-pin 2Rx4 RDIMM fits 6016T, 6016TT, 6016XT, 6026T, 6026TT series
  • Replaces Supermicro MEMDR380L part numbers for direct upgrade

Specifikacijos

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 6016T Series
Supermicro SuperServer 6016TT Series
Supermicro SuperServer 6016XT Series
Supermicro SuperServer 6026T Series
Supermicro SuperServer 6026TT Series

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the 2Rx4 ECC Registered RDIMMs in a Supermicro SuperServer 6016T, and what step is often missed?

Power down, open the chassis, align the 240-pin key notch with the slot, press firmly until both latches click, then verify in BIOS that both 8 GB modules are detected at 1333 MHz CL9; the step often missed is confirming the server is configured for registered ECC memory before booting.

What maintenance or replacement will the 16 GB DDR3 1333 kit need over its service life?

No scheduled maintenance is required; if a module fails, replace the faulty 8 GB stick with an identical DDR3 1333 PC3-10600 CL9 2Rx4 1.5 V registered ECC part to keep dual-channel operation intact.

What limit appears first when the 2Rx4 registered DIMMs run sustained workloads in a 6026T series server?

The DDR3 1333 MT/s bandwidth ceiling is reached before thermal throttling, because the modules have no heat spreader and operate at the standard 1.5 V JEDEC voltage.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.