Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular memory module with gold edge contacts and black chips on both sides

OWC

OWC 16GB DDR4 2133MHz CL15 1.2V 288pin UDIMM for Dell OptiPlex 7040 SFF Tower

SKU CH-5X73-GYDXA

16 GB DDR4-2133 CL15 UDIMM tested for Dell OptiPlex 7040 SFF and Tower

  • Capacity16GB
  • Type288-Pin DDR4 Non-ECC UDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCNo
  • Boosts multitasking with 16GB DDR4 capacity
  • Runs efficiently at 1.2V low voltage
  • Fits Dell OptiPlex 7040 SFF and Tower
  • Meets JEDEC PC4-17000 CL15 specifications
  • Simple DIY upgrade with 288-pin UDIMM design

16GB DDR4 UDIMM for Dell OptiPlex 7040

This 16GB DDR4 2133MHz CL15 module is built specifically for the Dell OptiPlex 7040 SFF and Tower. It uses a 288-pin unbuffered non-ECC design at 1.2V. The part targets owners of those exact systems who need a single 16GB stick to expand memory capacity.

JEDEC compliance and lifetime warranty

The memory meets JEDEC standard specifications and is ROHS compliant, ensuring a warranty-safe upgrade that will not void the original system coverage. OWC includes an advanced replacement programme and limited lifetime warranty with free technical support. There are no bundled accessories, software or heat spreaders in the package.

Simple DIY installation with video guide

Installation is a straightforward DIY task on the compatible OptiPlex 7040 chassis; OWC provides a basic installation video for reference. The module is unbuffered and non-ECC, so it will not work in systems that require registered or ECC memory. Buyers needing ECC or registered DIMMs should look elsewhere.

Privalumai

  • Boosts multitasking with 16GB DDR4 capacity
  • Runs efficiently at 1.2V low voltage
  • Fits Dell OptiPlex 7040 SFF and Tower
  • Meets JEDEC PC4-17000 CL15 specifications
  • Simple DIY upgrade with 288-pin UDIMM design

Specifikacijos

BrandOWC
Part Number2U1D42R816GB
Capacity16GB
Type288-Pin DDR4 Non-ECC UDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7040 SFF
Dell OptiPlex 7040 Tower

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will the 288-pin DDR4 module need any firmware updates or cleaning over its lifetime?

No firmware or cleaning is required; the 16GB DDR4 2133MHz CL15 1.2V 288-pin UDIMM is a passive component with no moving parts or updatable firmware.

What limit appears first when the 16GB DDR4 2133MHz CL15 kit runs at full load for hours?

The memory controller caps throughput at the rated 2133MHz PC4-17000 speed; latency stays at CL15 and voltage remains at 1.2V under sustained use.

How much heat and power does the 1.2V unbuffered DDR4 DIMM produce during all-day operation?

At 1.2V the module draws minimal power and runs cool without a heat spreader, adding negligible heat or noise inside the Dell OptiPlex 7040 SFF or Tower.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.