Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with gold edge contacts and black memory chips, no heat spreader

OWC

OWC 16GB DDR5 4800 CL40 1Rx8 288-pin 1.1V UDIMM for Precision 3660 Tower 3660XE Tower

SKU CH-ART9-M7VYP

A 16 GB DDR5 4800 CL40 UDIMM upgrade for Dell Precision 3660 and 3660XE Tower workstations

  • Capacity16GB
  • Type288-Pin DDR5 Non-ECC UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCNo
  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces power draw and heat
  • JEDEC-standard PC5-38400 ensures warranty-safe upgrade
  • 288-pin UDIMM fits Precision 3660 and 3660XE towers
  • Single 1Rx8 rank module simplifies DIY installation

Precision 3660 Tower memory upgrade

This 16GB DDR5 module is built for Dell Precision Workstation 3660 Tower and 3660XE Tower systems. It replaces Dell part numbers AB883074 and AC027075. The kit targets professionals who need a straightforward capacity increase for demanding workloads. It is not suited for servers requiring ECC or registered DIMMs.

DDR5 4800 CL40 1.1V JEDEC standard

The module runs at 4800 MT/s with CL40 latency at the standard 1.1V JEDEC voltage. This single specification decides whether the part matches your platform's supported speed and timing. Systems that only accept slower DDR5 or require different voltage will not operate correctly with this module.

Single 288-pin UDIMM for open slot

The unbuffered 288-pin DIMM installs directly into an available UDIMM slot on the workstation motherboard. No heat spreader is fitted, so clearance is minimal and compatible with standard CPU coolers. The upgrade frees no additional slots beyond the one occupied. Builders needing ECC, registered memory or higher density per module must choose a different part.

Privalumai

  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • 1 V operation reduces power draw and heat
  • JEDEC-standard PC5-38400 ensures warranty-safe upgrade
  • 288-pin UDIMM fits Precision 3660 and 3660XE towers
  • Single 1Rx8 rank module simplifies DIY installation

Specifikacijos

BrandOWC
Part Number4U8D51R816GB
Capacity16GB
Type288-Pin DDR5 Non-ECC UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell Precision Workstation 3660 Tower
Dell Precision Workstation 3660XE Tower

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

What does the 4800 speed rating mean once the module is installed in my Precision 3660 Tower?

The module operates at 4800 MT/s with CL40 latency, matching the JEDEC standard for DDR5 4800 memory on the supported platform.

What interface standard does the 288-pin DDR5 connection use, and what does it cap in practice?

The 288-pin UDIMM follows the JEDEC DDR5 specification, running at 1.1 V with non-ECC unbuffered operation on the Precision 3660 and 3660XE.

What physical slot and clearance does this 1Rx8 UDIMM need to fit in the 3660 Tower?

It installs in a standard 288-pin DDR5 UDIMM slot and has no heat spreader, so it fits within the normal DIMM clearance of the Precision 3660 and 3660XE towers.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.