Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips, low-profile DDR4 module

OWC

OWC 32GB DDR4 2666 CL19 2Rx8 VLP ECC UDIMM MicroBlade 6119M-C2 6219G-T

SKU CH-6TWC-PD0KX

Adds 32 GB of DDR4 ECC memory at 2666 MT/s to Supermicro MicroBlade 6119M-C2 and 6219G-T servers

  • Capacity32GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 32GB capacity lets you run more apps and larger files simultaneously
  • DDR4 2666 speed with CL19 latency boosts overall system responsiveness
  • ECC unbuffered design protects data integrity in critical workloads
  • VLP 288-pin form factor fits Supermicro MicroBlade 6119M-C2 and 6219G-T
  • JEDEC and RoHS compliant at 1.2V for warranty-safe upgrades

OWC 32GB DDR4 module for Supermicro MicroBlade

This single 32GB DDR4 2666 CL19 VLP ECC UDIMM is built for the Supermicro MicroBlade 6119M-C2 and 6219G-T. It uses a 288-pin unbuffered layout with 2Rx8 organisation and runs at 1.2V. The module carries JEDEC and RoHS compliance for a warranty-safe upgrade.

Sustained load behaviour in dense blade chassis

The very low profile height allows airflow in tightly packed MicroBlade nodes. ECC protection corrects single-bit errors during continuous operation. Unbuffered topology keeps latency low at CL19 while the 2Rx8 rank structure supports steady throughput at DDR4 2666 speeds.

32GB capacity per DIMM slot

Each slot accepts one 32GB module, so total memory scales with the number of populated slots. Buyers needing more than 32GB per channel must add additional DIMMs. Systems limited to lower-density modules cannot use this part.

Privalumai

  • 32GB capacity lets you run more apps and larger files simultaneously
  • DDR4 2666 speed with CL19 latency boosts overall system responsiveness
  • ECC unbuffered design protects data integrity in critical workloads
  • VLP 288-pin form factor fits Supermicro MicroBlade 6119M-C2 and 6219G-T
  • JEDEC and RoHS compliant at 1.2V for warranty-safe upgrades

Specifikacijos

BrandOWC
Part Number2E6V42R832GB
Capacity32GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro MicroBlade 6119M-C2
Supermicro MicroBlade 6219G-T

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How much power does this 1.2 V DDR4 module draw when the Supermicro MicroBlade 6119M-C2 runs continuously?

The module operates at the standard 1.2 V DDR4 voltage. Actual power draw depends on the server workload and the platform's memory controller; no separate per-module wattage is published.

What else must already be in the chassis for this 288-pin VLP UDIMM to function?

A Supermicro MicroBlade 6119M-C2 or 6219G-T with an available DDR4 DIMM slot and a BIOS that supports 32 GB 2Rx8 ECC unbuffered modules at 2666 MT/s.

Will this CL19 2666 MT/s stick run correctly beside older DDR4 DIMMs already installed in the MicroBlade?

Mixing capacities, speeds or ranks is not recommended; the system will clock all modules to the slowest common timing, so matching this 32 GB 2Rx8 CL19 part is advised for stability.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.