Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular circuit board with 240 gold pins and black memory chips

OWC

OWC 4GB DDR3 1333 PC3-10600 CL9 2Rx8 240-pin 1.5V Non-ECC UDIMM memory upgrade for HP 8200 Elite SFF Tower

SKU CH-69WE-GC5W2

A 4 GB DDR3 1333 MHz module upgrades HP 8200 Elite SFF or Tower desktops with a standard 240-pin non-ECC UDIMM

  • Capacity4GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • Boost performance with a 4GB DDR3 1333MHz module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Simple DIY installation on HP 8200 Elite SFF or Tower
  • 240-pin unbuffered design runs at 1.5V CL9
  • Tested to meet or exceed OEM specifications

HP 8200 Elite SFF and Tower upgrade

This 4GB DDR3 module is built specifically for HP 8200 Elite SFF and Tower desktops. It targets owners of those systems who need a straightforward capacity increase without guessing compatibility. Buyers using any other platform, including other HP models, cannot use this DIMM.

4GB capacity at DDR3 1333 CL9

The single rank 2Rx8 stick delivers 4GB at PC3-10600 speed with CL9 latency and 1.5V operation. It handles everyday multitasking and larger file loads within the limits of the 8200 chipset. Systems that require ECC, registered modules or higher densities will not be supported by this non-ECC unbuffered design.

240-pin UDIMM without heat spreader

The standard 240-pin UDIMM form factor fits directly into the desktop slots of the compatible HP chassis. No heat spreader means a low profile that clears tight SFF interiors. Installers should confirm the motherboard accepts 2Rx8 organisation before fitting the module.

Privalumai

  • Boost performance with a 4GB DDR3 1333MHz module
  • JEDEC and RoHS compliant for a warranty-safe upgrade
  • Simple DIY installation on HP 8200 Elite SFF or Tower
  • 240-pin unbuffered design runs at 1.5V CL9
  • Tested to meet or exceed OEM specifications

Specifikacijos

BrandOWC
Part Number1U3D32R804GB
Capacity4GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP 8200 Elite SFF
HP 8200 Elite Tower

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Will this 4 GB DDR3 1333 module run alongside the existing PC3-10600 memory in my HP 8200 Elite SFF?

Yes, it matches the DDR3 1333 PC3-10600 CL9 1.5 V specification used by the 8200 Elite SFF and Tower, so it will operate at the same speed and timings as the factory DIMMs.

How can I confirm the new 4 GB DDR3 stick is recognised at the correct 1333 MHz speed after installation?

Enter the BIOS or use a tool such as CPU-Z; the memory tab should show DDR3 running at 1333 MHz with CL9 latency and 1.5 V voltage.

Does the 240-pin UDIMM come alone or with extra parts, and do I need anything else to install it in the HP 8200 Elite Tower?

The box contains only the single 4 GB 2Rx8 unbuffered DIMM; no cables, brackets or tools are included, and none are required for the standard DIMM slots on the 8200 Elite Tower.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.