Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green rectangular DDR4 288-pin ECC RDIMM module with black chips, no heat spreader

OWC

OWC 64GB DDR4 2933 ECC RDIMM 2Rx4 CL21 1.2V 288-pin memory upgrade

SKU CH-HG6F-9WV52

A 64GB DDR4 2933 ECC registered DIMM for Fujitsu PRIMERGY RX2520 M5, TX2550 M5, CX2570 M4, RX2530 M4 and RX2540 M4 servers

  • Capacity64GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes
  • 64 GB capacity lets you run larger workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2933 speed matches Fujitsu PRIMERGY server specs
  • 2 V operation reduces power draw in dense configs
  • Single 2Rx4 module simplifies upgrades on RX2520 M5 TX2550 M5

Server memory upgrade

This 64GB DDR4 2933 ECC registered DIMM is built for Fujitsu PRIMERGY servers and workstations. It delivers error-correcting, registered performance for 24/7 workloads in the RX2520 M5, TX2550 M5, CX2570 M4, RX2530 M4 and RX2540 M4 platforms. The single-module design adds capacity without occupying extra slots.

Build integration

The module uses the standard 288-pin DDR4 form factor and runs at 1.2V, matching the voltage and pin layout of the listed PRIMERGY systems. Registered signalling and 2Rx4 organisation require a motherboard that supports ECC registered memory; it cannot be mixed with unbuffered or load-reduced modules. Backward compatibility with 2133, 2400 and 2666MHz buses allows installation in older configurations without manual speed adjustment.

Thermals and power

Operating at 1.2V keeps power draw low for high-density server deployments. The module has no heat spreader, relying on chassis airflow for cooling in typical rack or tower environments. Registered buffering reduces electrical load on the memory controller, contributing to stable operation under sustained multi-threaded workloads.

Privalumai

  • 64 GB capacity lets you run larger workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2933 speed matches Fujitsu PRIMERGY server specs
  • 2 V operation reduces power draw in dense configs
  • Single 2Rx4 module simplifies upgrades on RX2520 M5 TX2550 M5

Specifikacijos

BrandOWC
Part Number2R9D42R464GB
Capacity64GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemFujitsu PRIMERGY RX2520 M5
Fujitsu PRIMERGY TX2550 M5
Fujitsu PRIMERGY CX2570 M4
Fujitsu PRIMERGY RX2530 M4
Fujitsu PRIMERGY RX2540 M4

Klausimai apie šią prekę

Will the 2933 MHz speed be maintained under sustained server workloads?

The module runs at 2933 MHz with CL21 latency at 1.2 V; JEDEC compliance means it will hold that speed as long as the platform's memory controller supports it.

How much heat does a registered 64 GB DIMM produce during all-day operation?

The 1.2 V DDR4 design and lack of a heat spreader keep thermal output low; registered buffering adds minimal extra power draw compared with unbuffered modules.

Which Fujitsu PRIMERGY systems must I already own for this module to work?

It is validated for PRIMERGY RX2520 M5, TX2550 M5, CX2570 M4, RX2530 M4 and RX2540 M4 servers.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.