Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti

OWC

OWC 8GB (4x2GB) DDR3 1066 PC3-8500 CL7 1.5V Desktop RAM

SKU CH-8C7W-8DYVS

A kit of four 2 GB DDR3 modules running at 1066 MHz with CL7 latency and 1.5 V operation for desktop systems

  • Capacity8GB (4 x 2GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.5V
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • Boost multitasking capacity with 8GB total memory across four 2GB modules
  • Responsive DDR3 1066 CL7 timing speeds up everyday desktop tasks
  • JEDEC-standard 1.5V operation ensures broad compatibility and stable voltage
  • Unbuffered non-ECC 240-pin DIMMs install easily in standard desktop slots
  • RoHS-compliant build meets environmental standards for worry-free upgrades

8GB DDR3 1066 kit for desktops

This kit provides eight gigabytes of DDR3 memory in four matched 2GB modules. It targets owners of older desktop PCs or workstations that use the PC3-8500 standard and need a straightforward capacity increase.

JEDEC standard unbuffered DIMMs

Each module is a 240-pin non-ECC UDIMM running at 1.5 volts with CL7 latency. The black circuit boards have no heat spreader, so they fit in tight slots and work with standard CPU coolers without clearance issues.

Check motherboard DDR3 support and slot count

Verify that your board accepts DDR3 1066 unbuffered memory and has four available DIMM sockets for the full kit. Confirm the maximum supported capacity per slot and total system limit before ordering.

Privalumai

  • Boost multitasking capacity with 8GB total memory across four 2GB modules
  • Responsive DDR3 1066 CL7 timing speeds up everyday desktop tasks
  • JEDEC-standard 1.5V operation ensures broad compatibility and stable voltage
  • Unbuffered non-ECC 240-pin DIMMs install easily in standard desktop slots
  • RoHS-compliant build meets environmental standards for worry-free upgrades

Specifikacijos

BrandOWC
Part Number8U5D31R8008S
Capacity8GB (4 x 2GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseDesktops
LED ColorNone

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does the DDR3 1066 PC3-8500 interface cap the kit at 1066 MHz in practice?

Yes, the JEDEC-standard DDR3 1066 PC3-8500 rating means each module runs at 1066 MHz with CL7 timings at 1.5 V, and the memory controller will not exceed that speed without manual overclocking.

What physical slot and clearance does the 240-pin UDIMM kit require?

Each 2 GB stick uses a standard 240-pin DDR3 UDIMM form factor without a heat spreader, so it fits any desktop DDR3 DIMM slot and clears most CPU coolers.

How is the four-module kit installed, and what step do builders often miss?

Power down, open the case, align each 240-pin module with the keyed slot and press firmly until the retention clips click; the step many miss is populating the correct colour-coded channel pairs so the board runs in dual-channel mode.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.