Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Eight spools of silk PLA filament in assorted colours on cardboard spools

PrintOxe

PrintOxe PLA like SILK Filament 8 Pack 1.75mm 1Kg Each Multi-colour 3d printers accessory

SKU CH-3E1B-6VCYA

Eight 1 kg spools of 1.75 mm PLA silk filament in green, red, yellow, blue, violet, silver, copper and orange, vacuum-sealed with desiccant, dimensional accuracy ±0.03 mm, prints at 200–220 °C

  • ColorMulti-color
  • TypeFilament
  • Eight vibrant silk colours in one pack
  • High-gloss silk finish on every print
  • Tight ±0.03 mm diameter accuracy
  • 75 mm filament fits popular printers
  • Vacuum-sealed spools with desiccant stay dry

Eight-colour silk PLA set

This eight-spool pack supplies 1 kg of 1.75 mm silk-finish PLA in green, red, yellow, blue, violet, copper, silver and orange. Each spool is vacuum-sealed with desiccant to protect the material from humidity. The filament is made from 100 % new corn-starch-based PLA and is produced to a dimensional tolerance of ± 0.03 mm. It suits hobbyists and makers who want a ready palette of glossy colours for decorative prints.

Consistent extrusion over long prints

The tight ± 0.03 mm diameter control keeps flow steady during extended jobs, reducing the risk of under- or over-extrusion that can appear on lower-grade spools. Natural, non-toxic PLA with minimal shrinkage and warping helps layers adhere reliably across large surface areas. Vacuum sealing with desiccant preserves low moisture content, so the filament feeds cleanly without popping or blistering even after storage. Recommended nozzle temperature is 200 °C to 220 °C (392 °F to 428 °F).

1.75 mm standard compatibility

The 1.75 mm diameter matches the most common desktop extruder format and works with printers such as MakerBot, RepRap, FlashForge, UP, Afinia, Mendel, Solidoodle 2, Printrbot LC and MakerGear M2. Spools measure 7.88 in (20.015 cm) diameter, 2.69 in (6.83 cm) width and have a 2.20 in (5.59 cm) hub hole, fitting standard spool holders. Total net weight is 8 kg (17.60 lb).

Privalumai

  • Eight vibrant silk colours in one pack
  • High-gloss silk finish on every print
  • Tight ±0.03 mm diameter accuracy
  • 75 mm filament fits popular printers
  • Vacuum-sealed spools with desiccant stay dry

Specifikacijos

BrandPrintOxe
ModelPLA like SILK
ColorMulti-color
TypeFilament

Klausimai apie šią prekę

How much heat does the 1.75 mm PLA-like SILK filament generate during a full-day print?

The filament itself produces no heat; the printer nozzle runs at 200°C – 220°C (392°F – 428°F) while extruding.

What spool dimensions must my printer’s holder accept for these 1 kg reels?

Each spool measures 7.88" diameter, 2.69" width, with a 2.20" hub hole.

Will the +/- 0.03 mm diameter tolerance work reliably on an older printer that lacks auto-calibration?

Yes, the tight tolerance reduces clogging and blistering on printers without automatic bed-leveling.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.