Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Grey ATX power supply unit with single fan and standard connectors

Replace Power

Replace Power FSP300-ATXPA-6 300W ATX power supply

SKU CH-WMNJ-BR4SW MPN FSP300-ATXPA-6

300 W ATX unit with 24-pin, 4-pin CPU, three SATA, three LP4 and one floppy connector for Dell Optiplex M8802, M8805, M8806, C9962 and 620 systems

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Direct replacement for Dell Optiplex 8802 8805 8806 C9962 620
  • ATX reduced-depth form factor fits compact chassis
  • 300 W output with +12V1 +12V2 +5V +3.3V -12V +5VSB rails
  • 24-pin ATX plus P4 4-pin three SATA three LP4 one floppy connectors
  • Hi-Pot tested low ripple noise rise time under 70 ms hold-up 17 ms

Replacement ATX Supply for Dell Optiplex

This 300W ATX power supply replaces the original unit in Dell Optiplex M8802, M8805, M8806, C9962 and 620 systems. It delivers +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails from a grey chassis. The reduced-depth form factor fits the tight space inside those chassis. Hi-Pot testing and low ripple specification target stable office workloads.

Connectors and Build Integration

A single 24-pin (20+4) ATX connector powers the motherboard while a P4 4-pin plug feeds the CPU. Three SATA 15-pin connectors, three LP4 4-pin plugs and one floppy 4-pin connector cover legacy and current drives. AC input accepts 110/220V at 47~63Hz so the unit works on global mains without a switch. One internal fan handles airflow in the compact enclosure.

Sustained Load Behaviour

Rise time stays below 70ms and hold-up time is rated at 17ms minimum at nominal input, giving the system a brief ride-through during mains dips. The 60/50Hz frequency rating matches standard line frequency. Continuous output is rated at 300W across the combined rails rather than a short peak figure. Builders needing higher wattage or additional PCIe power for discrete graphics should look elsewhere.

Privalumai

  • Direct replacement for Dell Optiplex 8802 8805 8806 C9962 620
  • ATX reduced-depth form factor fits compact chassis
  • 300 W output with +12V1 +12V2 +5V +3.3V -12V +5VSB rails
  • 24-pin ATX plus P4 4-pin three SATA three LP4 one floppy connectors
  • Hi-Pot tested low ripple noise rise time under 70 ms hold-up 17 ms

Specifikacijos

BrandReplace Power
ModelFSP300-ATXPA-6
ColorGrey
TypeATX
Fans1
Weight0.1

Klausimai apie šią prekę

How much hold-up time does the FSP300-ATXPA-6 provide at nominal load?

The unit delivers a minimum hold-up time of 17 ms at nominal input, giving the system a brief window to ride through short mains interruptions.

What is the typical noise and heat profile when this supply runs continuously?

A single internal fan cools the 300 W unit; with low ripple and noise specified, acoustic output stays modest during all-day operation.

Which Dell Optiplex models already have the correct mounting and wiring for this replacement?

The supply is a direct upgrade for Dell Optiplex M8802, M8805, M8806 and C9962 (620) chassis.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.