NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Replace Power
420W ATX power supply with reduced depth, 20+4 pin adapter, SATA connectors and full protection suite for legacy Dell and HP systems
The Replace Power RPSU-4g456 is a 420W ATX power supply designed to replace original units in older Dell Smartstep and HP desktops. It matches the 20+4 pin ATX connector so it fits both 20-pin and 24-pin motherboards. Reduced depth improves fit in compact chassis where space is limited. The unit ships new with a single cooling fan.
The supply delivers +3.3V at 11A, +5V at 12A and dual +12V rails at 8A each, with -12V at .3A and +5VSB at 2A. Over-current, over-power, over-voltage and short-circuit protection are built in. Input voltage is switchable between 110 and 260 volts AC at 50 or 60 Hz. Operating temperature range is 0 to 50 Celsius at full load. Three SATA, three LP4 and one floppy connector cover legacy drive configurations.
This unit replaces OEM supplies rated at 250W or below, adding headroom for added drives or a modest graphics card. The jump is worth it when the original unit fails, when system instability points to power limits or when a rebuild needs standard ATX connectors. It does not suit builds that require higher 12V current or modern GPU power connectors beyond the P4 4-pin.
| Brand | Replace Power? |
|---|---|
| Model | RPSU-4g456 |
| Type | ATX |
| Fans | 1 |
| Weight | 1.5 |
The unit is a single 420 watt model; there are no alternative capacities listed, so select this one for the Smartstep 100d, 150d and the other part numbers shown.
It indicates the total continuous power the unit can deliver across all rails, with +3.3V at 11A, +5V at 12A and two +12V rails each rated at 8A.
The 20+4 pin plug works with both 20 pin and 24 pin motherboards, and the supply also includes one P4 12V 4-pin, three SATA 15-pin, three LP4 4-pin and one floppy 4-pin connector.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?