Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Grey ATX power supply unit with single fan visible

Replace Power

Replace Power RPSU-C99-52 420W ATX power supply

SKU CH-ST84-H19XZ MPN RPSU-C99-52

Grey 420W ATX power supply with 80mm fan, 20+4 pin and SATA connectors, switchable 110/220V input, direct replacement for eMachines T3062 T3065 T3085 T3042 T3090 T3092

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • Reliable 420W output powers listed eMachines models
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • SATA, Molex and floppy leads cover legacy and current drives
  • Switchable 110V/220V input suits worldwide mains
  • Single 80mm fan provides active cooling

Replacement PSU for eMachines T3062 T3065 T3085

This 420W ATX power supply is a direct replacement for the listed eMachines desktops. It delivers the standard connectors those systems expect, including a 20+4 pin motherboard plug, a 12V ATX connector, SATA, Molex and a floppy power lead. The unit fits a standard ATX mounting pattern and uses a single 80mm fan for cooling.

Suits owners restoring the named eMachines models

Builders who need more than 420W of continuous power should look elsewhere. Systems that require PCIe power connectors for a discrete graphics card cannot use this unit. Anyone wanting modular cabling or an 80 Plus efficiency badge will not find those features here.

420W continuous output

The single rail design provides 420W total power across the 20+4 pin main connector and the dedicated 12V ATX lead. Input voltage is selectable between 110V and 220V. Cable lengths are 14 inches for the main ATX and 12V leads, and 15 inches for the SATA connector.

Privalumai

  • Reliable 420W output powers listed eMachines models
  • 20+4 pin ATX connector fits 20-pin and 24-pin motherboards
  • SATA, Molex and floppy leads cover legacy and current drives
  • Switchable 110V/220V input suits worldwide mains
  • Single 80mm fan provides active cooling

Specifikacijos

BrandReplace Power
ModelRPSU-C99-52
ColorGrey
TypeATX
Fans1
Weight0.1

Klausimai apie šią prekę

How loud and hot does the RPSU-C99-52 get when running continuously?

The unit uses a single 80 mm fan and a switchable 110V/220V input to deliver 420W, so thermal output scales with load; typical office workloads keep the fan at low speed while heavier draws spin it faster.

Which cables must my system already provide for the RPSU-C99-52 to connect?

The PSU supplies one 15-inch SATA lead, one 14-inch 20+4 pin motherboard lead, one 14-inch 12V ATX lead, two 15-inch and two 6-inch large peripheral leads, plus one 6-inch small peripheral lead — no extra cables are required.

Will the RPSU-C99-52 fit and power an older eMachines T3062 or T3092 chassis?

Yes — the model is listed as a direct 420W replacement for eMachines T3062, T3065, T3085, T3042, T3090 and T3092, matching their ATX form factor and connector layout.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.