RIMLANCE
RIMLANCE RRD25600S4C16 16GB DDR4 3200 ECC Registered RDIMM 1Rx4 CL22 1.2V 288-Pin
16GB DDR4 3200 ECC registered RDIMM with CL22 latency and 1.2V operation
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 3200 (PC4 25600)
- CAS LatencyCL22
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB capacity handles heavy server workloads
- DDR4 3200 speed accelerates data throughput
- ECC registered design protects data integrity
- 1Rx4 rank layout maximises module density
- 2 V operation reduces power draw
16 GB DDR4 ECC Registered Module
This 16 GB DDR4 module runs at 3200 MHz with CL22 latency and operates at 1.2 V. It uses a 288-pin RDIMM form factor with 1Rx4 organisation and on-board ECC. The registered buffer helps signal integrity in multi-module server configurations. It is built for DDR4 server and workstation platforms only.
Suited for DDR4 servers needing ECC integrity
It fits administrators expanding memory in registered-DIMM slots that require error correction and registered signalling. Builders using consumer desktop boards, unbuffered DIMM slots, or non-DDR4 platforms cannot use this module. Systems limited to lower speeds or different rank configurations should verify qualification lists before purchase.
Straightforward DIMM installation
Align the notch with the keyed slot, press firmly until the retention clips latch, and confirm seating visually. The most common issue is mixing registered DIMMs with unbuffered DIMMs or populating slots in an order the motherboard manual forbids. Always power down and observe anti-static precautions before handling.
Privalumai
- 16 GB capacity handles heavy server workloads
- DDR4 3200 speed accelerates data throughput
- ECC registered design protects data integrity
- 1Rx4 rank layout maximises module density
- 2 V operation reduces power draw
Specifikacijos
| Brand | RIMLANCE |
|---|---|
| Model | RRD25600S4C16 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
Klausimai apie šią prekę
What server or workstation do I need that supports DDR4 3200 registered ECC memory with a 288-pin slot?
The module is a 288-pin DDR4 3200 (PC4-25600) registered ECC RDIMM, so the host must provide a DDR4 RDIMM slot and support registered ECC operation at that speed.
Can I install this 1Rx4 registered stick alongside existing 2Rx8 or 4Rx4 modules in the same channel?
Mixing ranks is possible if the platform allows it, but population rules vary by server; the 1Rx4 organization may change rank-per-channel limits compared to dual- or quad-rank DIMMs.
How do I confirm the module is running at 3200 MT/s with CL22 after installation?
Check the BIOS memory information or an OS tool such as dmidecode; it should report 3200 MT/s, CAS latency 22, 1.2 V operation and registered ECC status.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



