Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green printed circuit board with black memory chips and gold contacts, 240-pin FBDIMM form factor

SAMSUNG

SAMSUNG M395T1K66AZ4-CE66 8GB DDR2 667 FB DIMM

SKU CH-3JMD-0T0KZ

8GB DDR2 667MHz FBDIMM ECC memory with 240-pin form factor for compatible systems

  • Capacity8GB
  • 8 GB capacity for large workloads
  • DDR2 667 MHz speed for responsive data access
  • Fully-buffered DIMM design for signal integrity
  • 240-pin layout fits compatible desktop slots
  • ECC support detects and corrects memory errors

8GB DDR2 FBDIMM ECC Module

This Samsung M395T1K66AZ4-CE66 is an 8GB DDR2 667 FBDIMM designed for desktop systems that accept fully buffered DIMMs. It operates with ECC error correction and uses the 240-pin form factor required by compatible motherboards. The module is supplied new and intended as a direct replacement or upgrade for supported platforms.

ECC FBDIMM for DDR2 Systems

This memory suits servers or workstations that specifically require registered ECC FBDIMMs running at 667 MT/s. Builders needing standard unbuffered non-ECC UDIMMs or systems that do not support the FBDIMM interface cannot use this part.

240-Pin FBDIMM Form Factor

The 240-pin FBDIMM form factor is the single specification that determines compatibility; only motherboards designed for DDR2 fully buffered DIMMs with ECC support will accept this module.

Privalumai

  • 8 GB capacity for large workloads
  • DDR2 667 MHz speed for responsive data access
  • Fully-buffered DIMM design for signal integrity
  • 240-pin layout fits compatible desktop slots
  • ECC support detects and corrects memory errors

Specifikacijos

Capacity8GB

Klausimai apie šią prekę

What motherboard slot and chipset do I need to install this 240‑pin FBDIMM?

The module requires a 240‑pin FBDIMM slot on a motherboard that supports DDR2 FB‑DIMM memory; standard DDR2 DIMM slots are not compatible.

Can I run this 667 MT/s ECC module with my existing non‑ECC DDR2 DIMMs?

No, FBDIMM architecture and ECC operation prevent mixing with standard non‑ECC DDR2 DIMMs; all slots must use matching FB‑DIMM modules.

How do I verify the module is detected at the correct speed and ECC mode?

Open the BIOS at startup and confirm the memory page lists an 8 GB FB‑DIMM running at 667 MT/s with ECC enabled.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.