SanDisk
SanDisk Ultra SDSSDH3-2T00-G26 2TB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
280,99 USD
0.00361276BTC
Yra sandėlyje
SanDisk
SanDisk Ultra 3D SDSSDH3-1T00-G26 2.5" 1TB SATA internal SSD
A 2.5" 1TB SATA solid-state drive using 3D NAND with sequential reads up to 555 MB/s and writes up to 520 MB/s
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form Factor2.5"
- Capacity1TB
- Memory Components3D NAND
- InterfaceSATA III
- Faster boot and app loads with sequential read up to 555 MBps
- Quicker file saves and transfers with sequential write up to 520 MBps
- 3D NAND technology gives higher endurance and lower power draw
- nCache 2.0 buffer accelerates burst write performance
- Shock-resistant solid-state design protects data if the laptop is dropped
Capacity and speed
The 1 TB drive delivers up to 555 MB/s sequential read and 520 MB/s sequential write over a SATA connection. That throughput is enough to accelerate operating-system boot, application launch and large-file transfers for everyday desktop or laptop workloads. Heavy sustained writes such as video rendering will eventually hit the SATA interface ceiling.
3D NAND and nCache 2.0
The drive uses 3D NAND flash paired with nCache 2.0 technology, which writes incoming data to a high-speed buffer before committing it to the main array. This architecture improves endurance and keeps performance consistent during mixed read/write activity. Lower power draw compared with mechanical drives also benefits laptop battery life.
2.5″ SATA integration
The standard 2.5″ form factor fits any drive bay or caddy that accepts a SATA III device, requiring only a data cable and a SATA power connector. No additional drivers are needed for modern operating systems. The solid-state design resists shock and vibration, protecting data if the system is moved or dropped.
Privalumai
- Faster boot and app loads with sequential read up to 555 MBps
- Quicker file saves and transfers with sequential write up to 520 MBps
- 3D NAND technology gives higher endurance and lower power draw
- nCache 2.0 buffer accelerates burst write performance
- Shock-resistant solid-state design protects data if the laptop is dropped
Specifikacijos
| Brand | SanDisk |
|---|---|
| Series | Ultra 3D |
| Model | SDSSDH3-1T00-G26 |
| Part Number | SDSSDH3-1T00-G26 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Protocol | SATA |
| Max Sequential Read | Up to 555 MBps |
| Max Sequential Write | Up to 520 MBps |
| Siuntos svoris | 0.05 kg |
| Pakuotės dydis | 140 × 102 × 23 mm |
Kiti šio modelio variantai
Dar 2 toje pačioje serijoje
Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.
SanDisk
SanDisk Ultra SDSSDH3-4T00-G26 4TB 2.5" SATA internal SSD
- Internal Solid Stat…
- Consumer
620,99 USD
0.00798424BTC
Yra sandėlyjeKlausimai apie šią prekę
Will the SanDisk Ultra 3D SDSSDH3-1T00-G26 fit a laptop bay that uses the 2.5" form factor?
Yes, the drive uses the 2.5" form factor and connects via SATA III, so it fits standard 2.5" SATA drive bays found in many older laptops and desktops.
How can I verify the SanDisk Ultra 3D SDSSDH3-1T00-G26 is performing at its rated 555 MBps read and 520 MBps write speeds?
Run a benchmark tool such as CrystalDiskMark on a SATA III port; sequential results should approach 555 MBps read and 520 MBps write for the 1 TB model.
What is included with the SanDisk Ultra 3D SDSSDH3-1T00-G26 and what must I supply myself?
The drive itself is included; a SATA data cable, mounting screws and any cloning software must be sourced separately.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
DELL
DELL ST3600057SS internal hard drive 600GB 15000RPM 3.5" SAS
153,99 USD
0.00197989BTC
Yra sandėlyje
