Seagate
Seagate Barracuda 7200.10 ST3500630AS 500GB 7200RPM 16MB 3.5" SATA internal hard drive
A 500 GB desktop hard drive spinning at 7200 RPM with a 16 MB cache and SATA 3.0 Gb/s interface
- 500 GB capacity stores large media libraries and backups
- 7200 RPM spindle speed reduces file access latency
- 16 MB cache buffers bursts for smoother throughput
- SATA 3.0 Gb/s interface enables fast sequential transfers
- 5 inch form factor fits standard desktop drive bays
500 GB desktop SATA hard drive
The Seagate Barracuda 7200.10 ST3500630AS is a 3.5 inch internal hard drive with a 500 GB capacity and a 7200 RPM spindle speed. It connects via a SATA 3.0 Gb/s interface and includes a 16 MB cache buffer. The drive is supplied as a bare unit without cables or mounting hardware.
Suits older desktop upgrades and secondary storage
This drive fits users replacing a failed drive in a legacy desktop or adding inexpensive bulk storage for documents and backups. It is not suited for builders who need the faster throughput of a 6 Gb/s SATA link or the low latency of solid-state storage.
SATA 3.0 Gb/s interface
The single specification that decides compatibility is the 3.0 Gb/s SATA interface. The host system must provide a matching SATA port; drives requiring a different interface will not work.
Privalumai
- 500 GB capacity stores large media libraries and backups
- 7200 RPM spindle speed reduces file access latency
- 16 MB cache buffers bursts for smoother throughput
- SATA 3.0 Gb/s interface enables fast sequential transfers
- 5 inch form factor fits standard desktop drive bays
Specifikacijos
Šiai prekei specifikacijos dar nepaskelbtos.
Klausimai apie šią prekę
What sustained throughput limit does the 3.0 Gb/s SATA interface impose on the ST3500630AS?
The SATA 3.0 Gb/s interface caps the maximum burst transfer rate at 3.0 Gb/s, so sustained throughput cannot exceed that link speed.
How much heat and noise does the 7200RPM mechanism produce during all-day operation?
The 7200RPM spindle and 3.5-inch form factor generate typical desktop drive heat and audible seek noise under continuous use.
Which host connector and power lead must already be present for this bare drive to work?
A SATA data port and a standard SATA power connector are required to install and run the drive.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



