Seagate
Seagate ST1000DL003 1TB 5.4K RPM 3Gb/s 3.5" SATA internal hard drive
A 1 TB 3.5-inch SATA desktop hard drive spinning at 5400 RPM with a 32 MB cache
- 1 TB capacity for bulk desktop storage
- 5400 RPM spindle speed balances power draw and noise
- 32 MB cache helps sustain sequential throughput
- SATA 3 Gb/s interface fits legacy motherboards
- 5 inch form factor suits standard drive bays
Purpose-built bulk storage
This 1 TB desktop hard drive spins at 5.4K RPM and connects through a 3 Gb/s SATA interface. It suits builders who need affordable capacity for media libraries, backups or secondary data volumes. The 32 MB cache helps smooth everyday read and write operations. Buyers who want faster application loading or boot speeds should consider solid-state alternatives.
Bare-drive delivery
The package contains only the drive itself with no cables, brackets, screws or software utilities. System integrators must supply their own SATA data and power cables plus any mounting hardware the chassis requires. This keeps cost low for high-volume deployments but adds a step for first-time upgraders. No cloning or diagnostic tools are bundled.
Straightforward 3.5-inch installation
The standard 3.5-inch form factor fits any desktop bay that accepts SATA drives. Connect the two cables, secure the drive with four screws and the BIOS will detect it on the next boot. The only common issue is forgetting to initialise the disk in the operating system before use. No special drivers or firmware updates are required.
Privalumai
- 1 TB capacity for bulk desktop storage
- 5400 RPM spindle speed balances power draw and noise
- 32 MB cache helps sustain sequential throughput
- SATA 3 Gb/s interface fits legacy motherboards
- 5 inch form factor suits standard drive bays
Specifikacijos
Šiai prekei specifikacijos dar nepaskelbtos.
Klausimai apie šią prekę
Will the 32 MB cache need any maintenance or replacement over time?
The 32 MB cache is built into the drive’s controller and has no user-serviceable parts. No maintenance or replacement is required for it.
What limit appears first when the 5400 RPM platters run continuously?
Sustained throughput is capped by the 3 Gb/s SATA link and the 5400 RPM spindle speed, so the interface and rotational latency become the bottleneck before thermal limits.
How much noise, heat and power does the 3.5" 1000 GB drive produce all day?
The 5400 RPM motor keeps acoustics low and power draw modest; the drive runs cool enough for standard desktop airflow without extra cooling.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.



