Seagate
Seagate ST4000NM0023 4TB 7200RPM 128MB 3.5" SAS internal hard drive
3.5-inch SAS hard drive delivers 4 TB at 7200 RPM with a 128 MB cache for server workloads
- 4TB capacity stores large server datasets
- 7200RPM rotational speed delivers fast data access
- 128MB cache buffer improves read/write performance
- SAS 6Gb/s interface enables high-throughput connectivity
- Perpendicular Magnetic Recording technology increases storage density
Seagate Constellation ES.3 4TB drive
The Seagate ST4000NM0023 is a 4TB 3.5-inch internal hard drive spinning at 7200RPM with a 128MB cache and a SAS 6Gb/s interface. It is built for server and storage-array environments where sustained throughput and vibration tolerance matter. The unit ships as a zero-hours drive from the Constellation ES.3 line.
Server and array deployments
This drive suits administrators expanding SAS-based RAID arrays, backup targets or nearline storage tiers that demand 7200RPM performance and dual-port SAS connectivity. It is not appropriate for desktop PCs, laptops or external enclosures that lack a SAS controller or backplane. Buyers who need a single-drive upgrade for a consumer motherboard should look elsewhere.
SAS 6Gb/s interface
The single specification that decides fit is the SAS 6Gb/s interface; the drive requires a compatible SAS HBA, RAID controller or backplane to operate and will not function on ports that support only other protocols.
Privalumai
- 4TB capacity stores large server datasets
- 7200RPM rotational speed delivers fast data access
- 128MB cache buffer improves read/write performance
- SAS 6Gb/s interface enables high-throughput connectivity
- Perpendicular Magnetic Recording technology increases storage density
Specifikacijos
Šiai prekei specifikacijos dar nepaskelbtos.
Klausimai apie šią prekę
What controller and port does the ST4000NM0023 need to operate?
It requires a SAS host-bus adapter or RAID controller with a 6Gb/s SAS port and a compatible cable or backplane.
Can the 7200RPM SAS drive share a backplane with 6Gb/s SAS SSDs?
Yes, the drive uses the same 6Gb/s SAS interface, so it can populate the same backplane as SAS SSDs running at that speed.
How can I confirm the 128MB cache is active after installation?
Run the built-in Drive Self Test and check the controller BIOS or management utility; both will report the 128MB buffer size.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Iomega Corp Z250ATAPI BLACK 250MB ZIP backup drive
- 250MB
- 2941RPM
DELL 7T0DW 600GB 2.5" SAS 10000 RPM laptop hard drive
- Serial Attached SCS…
- 10000 RPM
Seagate ST500LT015 500GB 5400 RPM 16MB Cache SATA 6.0Gb/s 2.5" 7mm laptop hard drive
- 500GB
- 5400 RPM



