SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.
Seagate
A 2.5-inch SAS drive spinning at 15000 RPM with 600 GB capacity and 128 MB cache for enterprise workloads
The Seagate ST600MP0005 is a 2.5-inch mechanical hard drive built for 15000 RPM operation over a SAS 6Gb/s interface. It provides 600 GB of capacity and a 128 MB cache for high-throughput server workloads. The drive is supplied new and conforms to standard enterprise 2.5-inch dimensions.
This drive fits servers and storage arrays that accept 2.5-inch SAS devices running at 15000 RPM. Systems limited to slower spindle speeds, smaller caches or alternative interfaces will not realise the performance profile this unit delivers. Buyers needing larger capacities or different form factors should evaluate other options.
The 15000 RPM rotation rate determines the 3.33 ms average latency that defines random-access responsiveness. If the target platform cannot accommodate 15K drives due to thermal, power or backplane constraints, this model is not the correct choice.
| Brand | Seagate |
|---|---|
| Model | ST600MP0005 |
| Interface | SAS 6Gb/s |
| Capacity | 600 GB |
| Flash Memory Capacity | N/A |
| Cache | 128MB |
| Average Latency | 3.33 milliseconds |
| RPM | 15000 RPM |
| Features | SAS 2.5 inch for Server |
| Usage | Mechanical Hard Disk |
| Form Factor | 2.5-inch |
| Height (maximum) | 70.1 in x 100.45 in x 15.0 in |
| Width (maximum) | 70.1 in x 100.45 in x 15.0 in |
| Length (maximum) | 70.1 in x 100.45 in x 15.0 in |
| Siuntos svoris | 0.25 kg |
| Pakuotės dydis | 203 × 140 × 51 mm |
Slide the drive into a 2.5-inch SAS hot-swap tray until the connector seats firmly, then secure the tray latch; the step often missed is fully engaging the SAS connector before locking the lever.
As a mechanical hard disk with 15000 RPM platters, the bearings and actuator will wear over time; plan to replace the drive once SMART reallocated-sector counts rise or seek errors appear.
The 15000 RPM spindle caps sequential throughput, so sustained write speed plateaus at the mechanical media rate before the SAS 6Gb/s link or 128 MB cache saturates.
Taip pat šiame skyriuje
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Tai, kuo mokate, ir valiuta, kuria matote kainas.
Išsiunčiama iš Jūsų piniginės atsiskaitant
Tik rodoma — katalogo kainos nurodytos doleriais
Tokios valiutos nerasta.
Pasirinkite kalbą, kuria Jums kalbės svetainė.
Tokios kalbos nerasta.
Pirmą kartą čia?
Jau turite paskyrą?
Automatinio atstatymo nėra: ši parduotuvė nesiunčia jokių el. laiškų, todėl nėra jokios vienkartinės nuorodos, kurios būtų galima paprašyti. Palikite adresą paskyroje, ir juo bus pasirūpinta rankiniu būdu.
Prašymas užfiksuotas
Į Jūsų pašto dėžutę niekas nekeliauja — ši parduotuvė apskritai nesiunčia jokių el. laiškų. Šiuos prašymus kažkas peržiūri rankiniu būdu.
Prisiminėte?