Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Silver 1U rack server front with four 3.5 inch drive trays

Supermicro

Supermicro SYS-6018U-TR4T+ 1U rack server 2x Xeon E5-2667 v4 3.2GHz 8-core 32GB DDR4 4x 3.5" trays

SKU CH-ANRQ-Y7B32

1U rack server with dual Xeon E5-2667 v4 3.2GHz 8-core CPUs, 32GB DDR4 ECC, MegaRAID 9361-8i controller, four 3.5″ hot-swap bays, quad 10GBase-T LAN and IPMI 2.0, dual 750W redundant PSUs

  • Rack Height1U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed3.20 GHz
  • CPU SocketLGA 2011-3
  • Number of CPU Cores8-Core Processor
  • Dual Xeon E5-2667 v4 processors run at 3.2GHz with 3.6GHz turbo
  • 32GB DDR4 2400MHz registered ECC memory installed
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache
  • Four 10GBase-T RJ45 ports via Intel X540 controller
  • IPMI 2.0 provides KVM-over-LAN and virtual media over dedicated RJ45

Dual Xeon 1U server for dense compute

The Supermicro SYS-6018U-TR4T+ is a 1U rackmount system with two Intel Xeon E5-2667 v4 processors running at 3.2 GHz with eight cores each. It ships with 32 GB of DDR4 registered ECC memory installed across four modules. The platform targets virtualization hosts, HPC nodes and cloud workloads that need high core density in a single rack unit.

Hot-swap bays and quad 10GBase-T

Four 3.5-inch hot-plug trays accept SATA or SAS drives and connect to an LSI MegaRAID 9361-8i controller supporting RAID 0, 1, 5, 6, 10, 50 and 60 with 1 GB cache and battery backup. Networking uses a Supermicro AOC-UR-i4XT card providing four RJ45 10GBase-T ports via Intel X540. A dedicated RJ45 management port enables IPMI 2.0 with KVM-over-LAN and virtual media. Dual 750 W platinum hot-swap supplies deliver redundant power.

Replaces older dual-socket 2U boxes

The 1U form factor halves the rack footprint of traditional dual-processor servers while keeping 24 DIMM slots for up to 1.5 TB of DDR4. It suits teams consolidating legacy 2U systems that lack 10 GbE or modern RAID acceleration. The jump is worthwhile when density, 10GBase-T connectivity and hardware RAID with cache protection are required together. Buyers needing more than four 3.5-inch drives or front bezel and rails included should look elsewhere.

Privalumai

  • Dual Xeon E5-2667 v4 processors run at 3.2GHz with 3.6GHz turbo
  • 32GB DDR4 2400MHz registered ECC memory installed
  • MegaRAID 9361-8i controller supports RAID 0/1/5/6/10/50/60 with 1GB cache
  • Four 10GBase-T RJ45 ports via Intel X540 controller
  • IPMI 2.0 provides KVM-over-LAN and virtual media over dedicated RJ45

Specifikacijos

BrandSUPERMICRO
SeriesCSE-819U + X10DRU-i+
ModelSYS-6018U-TR4T+
Rack Height1U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed3.20 GHz
CPU SocketLGA 2011-3
Number of CPU Cores8-Core Processor
# of Processors InstalledE5-2667 V4
Installed Memory Size32GB
Storage ControllerLSI MegaRAID 9361-8i Controller
HDD InterfaceSATA/SAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerSupermicro AOC-UR-i4XT - Intel X540 - 4x RJ45 10GBase-T Ports
Management PortRJ 45
Features4 x 3.5" SATA/SAS Hot-Plug Drive Bays

Klausimai apie šią prekę

What PCIe generation does the 9361-8i controller use, and what throughput does that cap at?

The LSI MegaRAID 9361-8i is a 12 Gb/s SAS controller on a PCIe 3.0 x8 link, so the practical ceiling is the 12 Gb/s per port SAS lane speed.

What rail kit or mounting hardware is required to install this 1U chassis in a standard rack?

The server uses the CSE-819U chassis; front bezel and rack-mount rails are not included, so you must supply compatible 1U slide rails for a 19" rack.

How is the IPMI 2.0 management port configured on first boot, and what step is commonly missed?

Connect the dedicated RJ45 IPMI LAN port, then set a static IP or enable DHCP in the BIOS/IPMI setup; the step often missed is saving the network settings before exiting the IPMI configuration menu.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.