Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two grey thermal pads 120 by 20 by 1.5 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 120x20x1.5mm 2-Pack

SKU CH-CQZC-YHZDT

Electrically non-conductive thermal pads measuring 120x20x1.5mm for SSDs, GPUs and electronic components

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Good thermal conductivity for efficient heat transfer
  • Electrically non-conductive design protects sensitive electronics
  • Easy-to-use pads simplify installation on SSDs and GPUs
  • Excellent price-performance ratio across the Basic series
  • Grey 120 x 20 x 1.5 mm dimensions suit compact components

Thermal Pad for SSDs and GPUs

The Thermal Grizzly Minus Pad Basic is a grey thermal interface pad sized 120x20mm with a 1.5mm thickness. It is electrically non-conductive and designed for SSDs, GPU coolers, water blocks, voltage regulators and memory modules. The pack contains two pads for multiple applications.

Step Up from Basic Paste or Thicker Pads

This pad replaces thermal paste where a consistent gap must be filled without pump-out or mess. It upgrades from thicker, less compliant pads that leave air pockets on uneven surfaces. The jump is worth it when you need reliable contact on components with varying heights.

Fits M.2 Slots and GPU VRM Arrays

The 120mm length covers standard M.2 2280 drives and typical VRM rows on graphics cards. The 1.5mm thickness bridges common gaps between chips and heatsinks without excessive pressure. It frees you from cutting large sheets and ensures each pad matches the component footprint.

Privalumai

  • Good thermal conductivity for efficient heat transfer
  • Electrically non-conductive design protects sensitive electronics
  • Easy-to-use pads simplify installation on SSDs and GPUs
  • Excellent price-performance ratio across the Basic series
  • Grey 120 x 20 x 1.5 mm dimensions suit compact components

Specifikacijos

BrandThermal Grizzly
ModelTG-MP-P-120-20-15-2
Part NumberTG-MP-P-120-20-15-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Klausimai apie šią prekę

Will the 120 x 20 mm pad fit my M.2 SSD without trimming?

The pad measures 120 mm long and 20 mm wide, matching a standard 2280 SSD footprint exactly.

How do I install the 1.5 mm thick pad without trapping air bubbles?

Peel the protective film, align the pad on the component, then press down evenly from the centre outward so the material conforms to the surface.

When should I replace the grey thermal pad after prolonged GPU use?

Replace it if the pad hardens, tears during disassembly, or if temperatures rise noticeably after heavy loads.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.