Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Translucent USB-A to DB9 converter cable with magnetic ring, 4.92ft

UOTEK

UOTEK UT-850N USB to RS485 RS422 Converter 4.92ft

SKU CH-QA7W-YP5ED

Connects USB-A devices to RS-485 or RS-422 serial equipment over 4.92ft with automatic baud-rate detection up to 921.6Kbps and 32-device multi-point support

  • TypeConverter
  • Cable Length4.92ft
  • Connector AUSB-A male
  • Connector BDB9 male
  • Connects legacy RS-422/485 gear via USB-A
  • Auto-detects baud rates from 300 to 921.6 Kbps
  • Links up to 32 devices on one bus
  • ±15 kV ESD protection guards the port
  • 5 m cable with translucent magnetic ring

Industrial USB to Serial Adapter

The UOTEK UT-850N connects legacy RS-485 or RS-422 equipment to a modern USB-A port using a 1.5 metre cable. It supports asynchronous communication in half-duplex or full-duplex modes with automatic data-direction control. The adapter handles baud rates from 300 to 921.6Kbps and can link up to 32 devices on a single bus. Surge and ±15KV ESD protection guard the serial port in harsh environments.

Replaces Native Serial Ports

This converter replaces an onboard DB9 or PCI serial card when a PC lacks native RS-485/422 interfaces. The jump is worth it for industrial machines, PLCs or HMIs that must communicate over twisted-pair cable up to 5,000 metres at 9,600bps. USB bus power keeps the link under five metres from the host, so the adapter suits cabinet-mounted gear without an external supply.

For Field Engineers and Integrators

Technicians maintaining factory automation, building-management or SCADA systems gain a reliable USB bridge to older field devices. The wide temperature range of -20 to 75°C and humidity tolerance up to 95% suit cabinet and outdoor enclosures. Buyers needing galvanic isolation, wireless connectivity or a USB-C host interface should look at other products.

Privalumai

  • Connects legacy RS-422/485 gear via USB-A
  • Auto-detects baud rates from 300 to 921.6 Kbps
  • Links up to 32 devices on one bus
  • ±15 kV ESD protection guards the port
  • 5 m cable with translucent magnetic ring

Specifikacijos

BrandUOTEK
ModelUT-850N
TypeConverter
Cable Length4.92ft
Connector AUSB-A male
Connector BDB9 male

Klausimai apie šią prekę

What DB9 pinout does the UT-850N use for RS-422 and RS-485?

The DB9 male connector carries T+, T-, R+, R- and GND for RS-422, and T+, T- and GND for RS-485, matching the EIA-422/485 standard pinout.

How do I enable the automatic direction control on the converter?

No configuration is required; the UT-850N uses data-flow auto-direction technology that detects the serial signal and switches the transceiver without driver settings.

When should I add termination resistors to the RS-485 bus?

Add 120 Ω termination at each end of the twisted-pair line when the bus runs at high baud rates or over long distances to prevent signal reflections.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.