Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Four black DDR5 registered DIMMs with silver heat spreaders

V-color

V-color OC R-DIMM 64GB (16GBx4) DDR5 7000 CL34 ECC Registered server RAM

SKU CH-4DN6-2AQS9

64GB kit of four 16GB DDR5-7000 registered ECC modules with CL34 timings and AMD EXPO support for TRX50 workstations

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 7000 (PC5 56000)
  • CAS LatencyCL34
  • Timing34-42-42-102
  • Voltage1.40V

Capacity 64GB (4 x 16GB)

  • 64GB (4 x 16GB)
  • 128GB (4 x 32GB)
  • 192GB (4 x 48GB)
  • 256GB (4 x 64GB)
  • 512GB (4 x 128GB)
  • 1TB (4 x 256GB)
  • 384GB (4 x 96GB)

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

Speed DDR5 7000 (PC5 56000)

Rank 1Rx8

Perbrauktos versijos egzistuoja, bet šiame sandėlyje jų nėra.

  • 64 GB capacity across four 16 GB modules for large workloads
  • DDR5 7000 speed with CL34 latency delivers high bandwidth
  • ECC registered design protects data integrity in critical tasks
  • AMD EXPO profile enables one-click overclocking on TRX50
  • Hynix ICs on 10-layer PCB ensure stable operation

Capacity and platform fit

This kit delivers 64GB of DDR5 memory across four 16GB registered DIMMs built for AMD TRX50 workstation boards. It targets professionals who need ECC-protected capacity for Threadripper PRO 7000 series systems running memory-intensive workloads.

Build quality and daily implications

Each module uses Hynix ICs on a 10-layer PCB with an integrated heat spreader and on-board PMIC for stable power delivery. The 288-pin RDIMM form factor seats in standard DDR5 server slots, while the registered buffer reduces electrical load on the memory controller during sustained operation.

Overclocking limits and interface constraints

AMD EXPO profiles set the kit to 7000MHz at CL34-42-42-102 timings with 1.40V, pushing beyond standard DDR5 speeds for this registered class. Buyers who need JEDEC-standard voltages or lower-latency timings at stock frequencies should look elsewhere. The DDR5 architecture provides two 40-bit sub-channels per DIMM, doubling burst bandwidth over DDR4, yet stability at this frequency depends on motherboard trace quality and BIOS maturity.

Privalumai

  • 64 GB capacity across four 16 GB modules for large workloads
  • DDR5 7000 speed with CL34 latency delivers high bandwidth
  • ECC registered design protects data integrity in critical tasks
  • AMD EXPO profile enables one-click overclocking on TRX50
  • Hynix ICs on 10-layer PCB ensure stable operation

Specifikacijos

BrandV-Color
SeriesOC R-DIMM
ModelTRA516G70S834Q
Part NumberTRA516G70S834Q
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 7000 (PC5 56000)
CAS LatencyCL34
Timing34-42-42-102
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
BIOS/Performance ProfileAMD EXPO
ChipsetHynix IC
Heat SpreaderYes
FeaturesOverclocking R-DIMM ECC Registered DIMM Memory for TRX50 Workstation (AMD Expo)

Kiti šio modelio variantai

Dar 5 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

Does the DDR5-7000 AMD EXPO profile run at the rated 7000 MT/s on a TRX50 workstation board?

The kit is validated for AMD EXPO on TRX50 motherboards, so the 7000 MT/s profile activates when EXPO is enabled in BIOS.

Will these 288-pin RDIMMs with heat spreaders clear a standard TRX50 CPU cooler?

The modules use a low-profile heat spreader on a 10-layer PCB; they fit under most TRX50 air coolers but verify your cooler’s DIMM clearance spec.

Do I need to set 1.40 V manually, or does EXPO apply it automatically?

EXPO loads 1.40 V, CL34-42-42-102 timings and 7000 MT/s together; the common mistake is leaving EXPO disabled and expecting rated speed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.