Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Pink 120mm reverse-blade ARGB case fan with infinite mirror centre and rubber mounts

Vetroo

Vetroo LR120 120mm Reverse Blade ARGB Case Fan Pink

SKU CH-YNH6-0K0C6

120 mm reverse-blade case fan with infinite-mirror ARGB lighting, PWM control up to 1600 RPM and fluid-dynamic bearing for 25–30 dBA noise

  • Fan Size120mm
  • LEDAddressable RGB
  • TypeReverse Blade
  • Bearing TypeFluid Dynamic Bearing
  • RPM800-1600 RPM
  • Air Flow45-50 CFM

Type Reverse Blade

Number 1-Pack

  • Reverse blades show front lighting at all times
  • Infinite mirror on both sides creates depth effect
  • ARGB syncs via 5V 3-pin to match system colours
  • PWM runs 600-1600 RPM for up to 48 CFM airflow
  • Fluid dynamic bearing plus 8 rubber pads keep noise at 25-30 dBA

Pink reverse-blade ARGB case fan

The Vetroo LR120 is a 120 mm case fan with a pink reverse-blade design that keeps the illuminated front face visible inside the chassis. Addressable RGB lighting syncs through a 5 V 3-pin motherboard header for coordinated colour effects. A fluid dynamic bearing and eight rubber pads are fitted for low-noise operation and long-term durability. Builders who want a single decorative intake or exhaust fan with mirror accents will find this unit suitable.

Thermals noise and power

PWM control varies the speed between 600 and 1600 RPM, delivering up to 48 CFM of airflow for system cooling. Noise output stays between 25 and 30 dBA across the operating range. The fan draws power from a standard 4-pin connector, so no external controller is required. Buyers who need higher static pressure for dense radiators or silent operation below 20 dBA should look elsewhere.

120 mm reverse blade with infinite mirror

The defining specification is the 120 mm reverse-blade layout combined with infinite-mirror panels on both sides and the centre, creating a depth effect that ordinary fans cannot produce. This visual feature dictates whether the fan matches the aesthetic goal of the build. Anyone who prioritises raw airflow over lighting presentation will not benefit from this design.

Privalumai

  • Reverse blades show front lighting at all times
  • Infinite mirror on both sides creates depth effect
  • ARGB syncs via 5V 3-pin to match system colours
  • PWM runs 600-1600 RPM for up to 48 CFM airflow
  • Fluid dynamic bearing plus 8 rubber pads keep noise at 25-30 dBA

Specifikacijos

Fan Size120mm
LEDAddressable RGB
TypeReverse Blade
Bearing TypeFluid Dynamic Bearing
RPM800-1600 RPM
Air Flow45-50 CFM
Noise Level25 - 30 dBA
Power Connector4 Pin
ColorPink
CompatibilityCase
Fan Counts1 Fan
Fan ControllerNo Controller
Fan Thickness25mm
Dimensions120×120×25mm

Kiti šio modelio variantai

Dar 3 toje pačioje serijoje

Ta pati šeima, bet skiriasi atmintis, aušintuvas ar dažnis — palyginkite prieš apsispręsdami.

Klausimai apie šią prekę

How do I install the Vetroo LR120 fan and connect its ARGB lighting to my motherboard?

Mount the 120mm fan using the four corner holes and included rubber pads, plug the 4-pin PWM connector into a motherboard fan header, then connect the separate 5V 3-pin ARGB cable to a 5V 3-pin header — not a 12V RGB header — so the infinite mirror lighting syncs correctly.

What maintenance will the fluid dynamic bearing and rubber pads need over time?

The fluid dynamic bearing is sealed and requires no lubrication; dust the nine reverse blades and mirror surfaces with compressed air every few months, and replace the eight rubber pads only if they harden or crack after several years of vibration damping.

At what point does noise become the limiting factor during sustained high-load operation?

At the maximum 1600 RPM the fan reaches 30 dBA, so sustained loads that push the PWM curve to the top will hit the acoustic limit before the 48 CFM airflow ceiling becomes a thermal bottleneck.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.