VisionTek
VisionTek 900981 1 TB 2.5" SATA internal SSD
A 1 TB 2.5" SATA internal SSD delivering 550 MB/s read and 445 MB/s write speeds with 3D MLC flash and a Silicon Motion controller
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- InterfaceSATA III
- Weight1
- 1 TB capacity for large libraries
- 550 MB/s read speed for quick loading
- 445 MB/s write speed for fast saves
- 5" 7 mm form fits most laptops
- SATA III interface with backward compatibility
1 TB SATA III 2.5" Internal SSD
The VisionTek 900981 is a 1 TB internal solid-state drive with a 2.5 inch 7 mm form factor and a SATA III interface. It delivers sequential reads up to 550 MB/s and writes up to 445 MB/s using 3D MLC NAND and a Silicon Motion controller. The drive is engineered for long-term real-world workloads and backward compatible with SATA 3G and 1.5G systems.
Suits SATA laptops and desktops needing capacity
This SSD fits most 2.5 inch bays in laptops, ultrabooks and desktop workstations that use a SATA connection. Power users, home offices, gamers, digital photographers and creative professionals benefit from access times up to 50x faster than a conventional HDD and data reliability up to 100x greater than an enterprise HDD. Systems without a 2.5 inch SATA interface cannot install this drive.
SATA III interface determines compatibility
The single specification that decides fitment is the SATA III interface combined with the 2.5 inch 7 mm form factor. Only devices with an available 2.5 inch SATA 6 Gb/s, 3 Gb/s or 1.5 Gb/s port can use this SSD.
Privalumai
- 1 TB capacity for large libraries
- 550 MB/s read speed for quick loading
- 445 MB/s write speed for fast saves
- 5" 7 mm form fits most laptops
- SATA III interface with backward compatibility
Specifikacijos
| Brand | VisionTek |
|---|---|
| Part Number | 900981 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | 2.5" |
| Interface | SATA III |
| Weight | 1 |
| Siuntos svoris | 0.09 kg |
| Pakuotės dydis | 203 × 107 × 1 mm |
Klausimai apie šią prekę
Does my system need a 2.5-inch drive bay and a SATA III cable to install this 900981 SSD?
Yes, the drive uses a 2.5-inch 7 mm form factor and a SATA III interface, so a compatible bay and SATA data plus power cables are required.
Will this SSD work in a laptop that only supports SATA 1.5 Gb/s?
The drive is backward compatible with SATA 3 Gb/s and 1.5 Gb/s machines, so it will function on older SATA ports at the port's maximum speed.
How can I verify the drive is delivering its rated 550 MB/s read and 445 MB/s write speeds after installation?
Run a standard SATA SSD benchmark such as CrystalDiskMark or AS SSD and confirm sequential read results near 550 MB/s and write results near 445 MB/s.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
DELL
DELL ST3600057SS internal hard drive 600GB 15000RPM 3.5" SAS
153,99 USD
0.00197831BTC
Yra sandėlyje
