VisionTek
VisionTek DLX4 Pro 901568 1TB M.2 2280 PCIe 4.0 x4 NVMe internal SSD
1TB M.2 2280 PCIe 4.0 x4 NVMe SSD with InnoGrit controller, DDR4 DRAM cache and up to 7415 MB/s sequential read
- Device TypeExternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D NAND
- InterfacePCI-Express 4.0 x4
- Sequential reads up to 7415 MB/s for fast boot and load times
- Sequential writes up to 6800 MB/s speed up large file transfers
- 4K random reads up to 730K IOPS keep multitasking responsive
- 4K random writes up to 1.1M IOPS accelerate application installs
- Low 0.3W idle power extends laptop battery life
VisionTek DLX4 Pro 1TB NVMe SSD
The VisionTek DLX4 Pro 901568 is a 1TB internal solid-state drive built for consumers who need fast storage in the M.2 2280 form factor. It uses 3D NAND flash and the NVMe 1.4 protocol over a PCI-Express 4.0 x4 interface. The InnoGrit IG5236 controller and DDR4 DRAM cache serve professionals, gamers and everyday users alike.
M.2 2280 form factor with 1500G shock rating
The drive fits a standard M.2 2280 slot and is rated to withstand 1500G of shock for 0.5ms plus vibration from 2 to 500Hz at 3.1G. Idle power draw is 0.3W and active consumption reaches up to 9.1W. Operating temperatures span 0°C to 70°C while storage tolerates -40°C to 85°C.
PCIe 4.0 x4 interface limits
Sequential reads peak at 7415 MBps and writes at 6800 MBps, while 4KB random performance reaches 730K IOPS read and 1.1M IOPS write. These figures represent the practical ceiling of the PCIe 4.0 x4 link and the NVMe 1.4 specification. Real-world throughput will vary with workload, host controller and thermal conditions.
Privalumai
- Sequential reads up to 7415 MB/s for fast boot and load times
- Sequential writes up to 6800 MB/s speed up large file transfers
- 4K random reads up to 730K IOPS keep multitasking responsive
- 4K random writes up to 1.1M IOPS accelerate application installs
- Low 0.3W idle power extends laptop battery life
Specifikacijos
| Brand | VisionTek |
|---|---|
| Series | DLX4 Pro |
| Model | 2280 |
| Part Number | 901568 |
| Device Type | External Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Controller | InnoGrit |
| Max Sequential Read | Up to 7415 MBps |
| Max Sequential Write | Up to 6800 MBps |
| 4KB Random Read | Up to 730K IOPS |
| 4KB Random Write | Up to 1.1M IOPS |
| Power Consumption (Idle) | 0.3W |
| Power Consumption (Active) | Up to 9.1W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G/0.5ms |
| Max Vibration Resistance | 2-500Hz, 3.1G |
| Siuntos svoris | 0.23 kg |
| Pakuotės dydis | 178 × 76 × 25 mm |
Klausimai apie šią prekę
What real-world throughput does the PCIe 4.0 x4 interface cap at for this 901568?
The drive reaches up to 7415 MBps sequential read and 6800 MBps sequential write over the PCIe 4.0 x4 link.
What motherboard slot and clearance does the M.2 2280 form factor require?
It fits a standard M.2 2280 key-M slot; the board is 22 mm wide and 80 mm long.
How do I install the DLX4 Pro and which step is most often missed?
Insert the drive at an angle into the M.2 slot, press flat, and secure with the motherboard screw; many forget to install the screw.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
Western Digital G-DRIVE ArmorATD 5TB portable hard drive SDPH81G005TGBA1D
OWC Gemini Ultra X6 12TB Thunderbolt portable SSD (OWCTB3GMA6X12)
- 12TB
- Thunderbolt



