Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with two red SATA ports and a gold PCIe edge connector

weastlinks

weastlinks PCIe to 2 Port SATA III 6Gbps Expansion Card

SKU CH-3SY9-79VBK

Adds two SATA III 6.0 Gbps ports via a PCI Express x1 slot using a Marvel 9125 controller

  • TypePCI Express to SATA Card
  • External USB Ports2x SATA III
  • Add two SATA 6.0 Gbps drives via a single PCIe x1 slot
  • Backward compatible with SATA 3.0 Gbps and 1.5 Gbps devices
  • Hot-plug and hot-swap support for drive changes without shutdown
  • Marvel 9125 controller with NCQ and Port Multiplier support
  • Works in x1, x4, x8 or x16 slots on Windows and Linux

PCIe to 2 Port SATA III Card

This expansion card adds two SATA III 6Gbps ports to a desktop computer through any available PCI Express x1, x4, x8 or x16 slot. It uses a Marvell 9125 controller and complies with SATA 3.0, 2.0 and 1.0 specifications. The board supports AHCI and IDE modes with Native Command Queuing for improved drive performance.

Suits builders adding SATA drives

Ideal for users who need extra SATA connections for hard drives or SSDs on a system with a free PCIe slot. It supports hot-plug and hot-swap operation, Gen 1i through Gen 3i speeds, and Port Multiplier switching. Not suited for users who need more than two SATA ports or who require a different host interface than PCI Express.

Requires PCIe x1 slot version 2.0

The card fits any PCIe x1, x4, x8 or x16 slot but needs a PCI Express 2.0 link to reach full 6Gbps throughput; a 1.0 slot limits speed to 250MB/s. Compatible with Windows 10, 8, 7, Vista, XP, Server 2003, 2008 and Linux in both 32-bit and 64-bit versions.

Privalumai

  • Add two SATA 6.0 Gbps drives via a single PCIe x1 slot
  • Backward compatible with SATA 3.0 Gbps and 1.5 Gbps devices
  • Hot-plug and hot-swap support for drive changes without shutdown
  • Marvel 9125 controller with NCQ and Port Multiplier support
  • Works in x1, x4, x8 or x16 slots on Windows and Linux

Specifikacijos

TypePCI Express to SATA Card
External USB Ports2x SATA III

Klausimai apie šią prekę

How do I install the weastlinks PCIe to 2 Port SATA III card and what slot mistake should I avoid?

Insert the card into any PCI‑Express x1, x4, x8 or x16 slot that is version 2.0; a version 1.0 slot limits speed to 250 MB/s and will not deliver full 6 Gbps performance.

What maintenance or replacement will the card need later?

The Marvel 9125 controller and SATA ports are solid‑state with no moving parts; only the SATA data cables may wear and need replacement over time.

What limit appears first under sustained heavy use?

The PCI‑Express x1 host link caps total throughput, so both SATA 6 Gbps ports share that bandwidth ceiling during continuous transfers.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.