Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Rectangular silver server power supply unit with rear fan grille and multiple cable connectors

WMtec

WMtec L500EPM-00 500W server power supply

SKU CH-TB2R-J7YJ9 MPN L500EPM-00

A 500 W server power supply compatible with OptiPlex 7080MT, 7070MT, 7060MT, 3050MT, 3650, 3670, 3671, 5090, 3260 and 3681 systems

  • 500W output powers demanding server workloads
  • 100-240V input works on global mains supplies
  • Three +12V rails each deliver 18A for stable GPU power
  • GPU 8-pin and 6-pin connectors support discrete graphics cards
  • Compatible with OptiPlex 7080MT 7070MT 7060MT 3050MT 3650 3670 3671 5090 3260 3681

500W replacement PSU for OptiPlex MT

The WMtec L500EPM-00 is a new 500W server power supply built to fit Dell OptiPlex 7080MT, 7070MT, 7060MT, 3050MT, 3650, 3670, 3671, 5090, 3260 and 3681 mini-tower chassis. It accepts 100-240V input at 50/60Hz and delivers up to 500W total output through three +12V rails rated at 18A each. Part numbers 99TPH, Y7R0X and 5K7J8 cross-reference to this model.

Suits owners of listed OptiPlex MT units

This unit matches the factory connector layout for the systems named above, providing GPU 8-pin, GPU 6-pin, an additional 6-pin and two 4-pin leads. Builders working on other form factors, proprietary small-form-factor OptiPlex models or non-Dell platforms should verify pin-outs and mechanical fit before purchasing.

Three +12V rails at 18A each

The power supply splits its 12V delivery across three independent rails, each capable of 18A. This rail configuration determines whether the unit can support the graphics cards or add-in boards planned for the compatible OptiPlex MT systems.

Privalumai

  • 500W output powers demanding server workloads
  • 100-240V input works on global mains supplies
  • Three +12V rails each deliver 18A for stable GPU power
  • GPU 8-pin and 6-pin connectors support discrete graphics cards
  • Compatible with OptiPlex 7080MT 7070MT 7060MT 3050MT 3650 3670 3671 5090 3260 3681

Specifikacijos

Šiai prekei specifikacijos dar nepaskelbtos.

Klausimai apie šią prekę

How do I install the L500EPM-00 into an OptiPlex 7080MT, and which cable often gets missed?

Slide the unit into the chassis until it clicks, then attach the 24-pin motherboard plug, the 4-pin CPU plug and the 8-pin GPU plug; the 6-pin GPU cable is the one most often left unconnected.

What maintenance will this 500W unit need after a year of daily use?

Clean the intake vents and fan blades with compressed air every six months; the internal fan is the only moving part and will eventually need replacement if noise or vibration appears.

Which output rail hits its limit first when the OptiPlex 7070MT runs a sustained heavy load?

Each +12V rail is rated at 18 A; the rail feeding the graphics card typically reaches that ceiling before the CPU or motherboard rails do.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.