Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Two black DDR5 DIMMs with low-profile heat spreaders, no LEDs

XPG

XPG AX5U6000C3016G-DTLABBK 32GB (2x16GB) DDR5 6000 CL30 desktop RAM

SKU CH-4B86-MNACY MPN AX5U6000C3016G-DTLABBK

32 GB dual-channel DDR5 kit at 6000 MT/s with CL30 timings and 1.35 V voltage

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-40-40
  • Voltage1.35V
  • Dual-channel 32 GB kit keeps data flowing
  • DDR5 6000 speed with CL30 latency cuts response time
  • 35 V operation lowers power draw and heat
  • XMP 3.0 and EXPO profiles enable one-click tuning
  • Low-profile black heat spreader fits tight CPU coolers

32GB DDR5 6000 CL30 Kit

The XPG Lancer Blade kit provides 32GB of DDR5 desktop memory in a dual-channel 2 x 16GB configuration. It runs at 6000 MT/s with a CAS latency of 30 and timings of 30-40-40 at 1.35V. The modules use a black heat spreader and carry no LED lighting.

AMD EXPO and Intel XMP 3.0 Ready

This kit suits builders who want a single XMP 3.0 and AMD EXPO profile for quick setup on supported platforms. It is listed as compatible with AMD 500 series, B550, X570, Intel Z590 and Z690 chipsets as well as Ryzen and Threadripper CPUs. Systems that require ECC or registered DIMMs should look elsewhere.

DDR5 6000 CL30 at 1.35V

The decisive specification is the 6000 MT/s speed combined with CL30 latency at 1.35V. This balance of frequency and tight timing determines whether the kit matches the memory controller capabilities of the target CPU and motherboard.

Privalumai

  • Dual-channel 32 GB kit keeps data flowing
  • DDR5 6000 speed with CL30 latency cuts response time
  • 35 V operation lowers power draw and heat
  • XMP 3.0 and EXPO profiles enable one-click tuning
  • Low-profile black heat spreader fits tight CPU coolers

Specifikacijos

BrandXPG
SeriesLancer Blade
ModelAX5U6000C3016G-DTLABBK
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-40-40
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 3.0 and AMD EXPO
ColorBlack
Heat SpreaderYes
Recommend UseAMD & Intel Compatible / AMD 500 Series / AMD B550 / AMD Ryzen Compatible / AMD Threadripper Compatible / AMD X570 / High Performance or Gaming Memory / Intel Compatible / Intel Z590 / Intel Z690
LED ColorNone
Siuntos svoris0.19 kg
Pakuotės dydis201 × 122 × 16 mm

Klausimai apie šią prekę

Does the AX5U6000C3016G-DTLABBK kit include any cables or adapters, or is it only the two memory modules?

The kit contains the two 16 GB DDR5 modules with black heat spreaders; no cables, adapters or extra accessories are included.

Should I pick the CL30 6000 MT/s kit or look for a different latency at the same speed?

CL30 at 6000 MT/s is the tightest latency this Lancer Blade series offers at that data rate, giving the best response time for Ryzen and Threadripper platforms.

What does the 6000 MT/s rating actually deliver once the kit is installed and XMP 3.0 or EXPO is enabled?

The modules run at 6000 MT/s with 30-40-40 timings at 1.35 V, providing the rated bandwidth and low latency without manual tuning.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.