Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 40 by 28 millimetre axial fan with three wires

Zyvpee

Zyvpee 1611KL-04W-B29 40×28 mm 12 V 0.11 A 3-pin case fan

SKU CH-315S-WWD6J

A compact 40×28 mm 12 V ball-bearing fan with a 3-pin connector for CPU-cooler mounting

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing ensures long-life operation
  • 40 mm × 28 mm frame fits tight CPU cooler mounts
  • 12 V 0.11 A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Non-LED black design suits stealth builds

Compact 40 mm CPU cooler fan

The Zyvpee 1611KL-04W-B29 is a 40 by 28 millimetre axial fan designed for CPU cooler compatibility. It operates on 12 volt DC power and draws 0.11 ampere through a three pin connector. The black non LED housing uses a ball bearing for rotation. This unit suits builders replacing a same size cooler fan or fitting tight spaces where a 40 millimetre frame is required.

Ball bearing thermals and low current draw

Ball bearing construction provides consistent airflow with reduced friction over sleeve alternatives. The 0.11 ampere rating at 12 volts indicates modest power consumption for a fan of this class. Three pin wiring allows voltage based speed control from a motherboard header. Noise and thermal output remain proportional to the voltage applied in normal operation.

Direct replacement for 4028 form factor coolers

This fan matches the 4028 footprint and three pin interface found on many compact CPU coolers. It upgrades worn or noisy units of identical dimensions and pinout without modification. The jump is worth it when the original bearing has failed or acoustic levels have risen beyond tolerance. Buyers needing larger frames, PWM control or LED lighting should look elsewhere.

Privalumai

  • Ball bearing ensures long-life operation
  • 40 mm × 28 mm frame fits tight CPU cooler mounts
  • 12 V 0.11 A draw keeps power use low
  • Three-pin connector enables motherboard speed control
  • Non-LED black design suits stealth builds

Specifikacijos

BrandZyvpee
Series1611KL-04W-B29
Model1611KL-04W-B29
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Cooling Fan
Dimensions40*28MM

Klausimai apie šią prekę

How do I install the 40 mm × 28 mm fan with its 3-pin connector?

Align the four mounting holes of the 40 mm frame with the CPU cooler bracket, secure with screws, then press the 3-pin plug onto the motherboard or cooler header — the keyed notch prevents reverse insertion.

What maintenance will the ball-bearing fan need over time?

The ball bearing is sealed; no lubrication is required. Clean dust from the blades and frame with compressed air every few months to maintain airflow.

At what point does the 12 V 0.11 A limit constrain sustained cooling?

The fan draws a fixed 0.11 A at 12 V, so its maximum speed and airflow are capped by that power envelope — sustained loads cannot push it beyond the rated current.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.