Zyvpee
Zyvpee AD0412HB-G70 40mm 12V 0.10A 2-pin case fan
A 40 mm ball-bearing case fan running at 1600 RPM on 12 V 0.10 A with a 2-pin connector
- TypeCPU Cooler Fan
- Bearing TypeBall
- RPM<1600 RPM
- Power Connector2 Pin
- ColorBlack
- LEDNon-LED
- Compact 40×10 mm frame fits tight builds
- Ball bearing rated for long service life
- 12 V 0.10 A draw keeps power use low
- Under 1600 RPM reduces audible noise
- Two-pin connector simplifies installation
Compact 40mm 12V case fan
The Zyvpee AD0412HB-G70 is a 40mm by 10mm DC fan that runs on 12 volts and draws 0.10 amps. It uses a two-pin power connector and a ball bearing for reliable rotation. The black, non-LED frame suits small-form-factor chassis or replacement cooling in tight enclosures.
Fits tight mounts and legacy headers
The 40*10mm footprint matches legacy 4010 mounting holes found on some CPU coolers, 3D-printer hot-ends and 16-channel DVR units. A two-pin header supplies power without PWM control, so the fan runs at a fixed speed once connected. No extra cables or adapters are required for standard two-pin sockets.
Steady airflow at 1600 RPM ceiling
Under continuous load the motor stays below 1600 RPM, delivering consistent airflow without ramping cycles. The ball bearing resists wear during long operating periods typical of always-on devices. Acoustic output remains stable because the speed does not fluctuate with a PWM curve.
Privalumai
- Compact 40×10 mm frame fits tight builds
- Ball bearing rated for long service life
- 12 V 0.10 A draw keeps power use low
- Under 1600 RPM reduces audible noise
- Two-pin connector simplifies installation
Specifikacijos
| Brand | 3ccooler.com |
|---|---|
| Series | AD0412HB-G70 |
| Model | AD0412HB-G70 |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| RPM | <1600 RPM |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 40*10mm |
Klausimai apie šią prekę
What is the maximum RPM of the AD0412HB-G70 fan under sustained load?
The fan spins at less than 1600 RPM, which is its upper speed limit during continuous operation.
How much power does the fan draw and what noise or heat should I expect when it runs all day?
It draws 0.10 A at 12 V, so power use is very low; the ball bearing runs quietly and produces minimal heat over long periods.
What connector must my motherboard or controller provide for this 2-pin fan to work?
You need a standard 2-pin DC header supplying 12 V; no PWM or additional wiring is required.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



