Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 80 by 80 by 38 mm square case fan with four wire PWM connector

Zyvpee

Zyvpee AS08024HB389B00 24V 1.5A 4 wires PWM 8038 case fan

SKU CH-F2MX-QB731

24 V PWM case fan with 4-wire control, ball bearing and 80 × 80 × 38 mm frame

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Wires
  • ColorBlack
  • LEDNon-LED
  • PWM control enables precise speed adjustment via 4-wire connector
  • Ball bearing design provides reliable long-term rotation
  • 24 V 1.5 A input suits industrial inverter power supplies
  • Compact 80 × 80 × 38 mm frame fits standard 8038 mounting holes
  • Non-LED black finish keeps builds clean and professional

Zyvpee 24 V PWM case fan

The Zyvpee AS08024HB389B00 is a 24 V, 1.5 A case fan with a four‑wire PWM connector. Its 80 mm by 80 mm frame is 38 mm thick and uses a ball bearing for long‑life operation. The black, non‑LED housing is built for standard case mounting.

Suits 24 V industrial or inverter cooling

This fan fits builds that supply a 24 V rail and need PWM speed control. It is not suitable for systems that provide only a lower voltage rail or that rely on three‑pin voltage regulation. Buyers needing a different voltage or connector should look elsewhere.

24 V 1.5 A four‑wire PWM specification

The 24 V, 1.5 A rating and four‑wire PWM interface are the decisive figures for compatibility. Verify that your hardware delivers exactly this voltage and control method before purchase.

Privalumai

  • PWM control enables precise speed adjustment via 4-wire connector
  • Ball bearing design provides reliable long-term rotation
  • 24 V 1.5 A input suits industrial inverter power supplies
  • Compact 80 × 80 × 38 mm frame fits standard 8038 mounting holes
  • Non-LED black finish keeps builds clean and professional

Specifikacijos

SeriesAS08024HB389B00
ModelAS08024HB389B00
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*38mm

Klausimai apie šią prekę

What does the 24 V 1.5 A rating mean for actual operation inside a case?

The fan draws up to 1.5 A from a 24 V DC supply, so the system must provide that voltage and current capacity on the 4-wire header.

How does the 4-wire PWM connection control speed in practice?

The fourth wire carries the PWM signal from the motherboard or controller, letting the fan vary its RPM while the other three wires supply constant 24 V power and ground.

Will the 80 mm by 38 mm frame with standard mounting holes fit my 80 mm fan slot?

Yes, the 80×80×38 mm dimensions match the common 80 mm mounting pattern, and the four corner holes align with standard case or radiator brackets.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.