Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 60 by 18 mm blower fan with three pins

Zyvpee

Zyvpee BD126018MB 60x18mm 12V .2A 3-pin case fan

SKU CH-NMFF-VCXSJ

A 60x18mm ball-bearing case fan that runs on 12V 0.2A through a 3-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60 x 18 mm frame fits tight projector housings
  • Ball-bearing motor reduces friction for longer service life
  • 12 V .2 A draw keeps power demand low
  • Three-pin connector enables simple motherboard or controller hookup
  • Non-LED black design avoids light bleed in dark environments

Compact 60 x 18 mm blower for tight builds

The Zyvpee BD126018MB is a 12 V, 0.2 A case fan with a 60 x 18 mm frame and a three-pin power connector. Its ball bearing and DC blower design target airflow through narrow channels such as projector housings or small-form-factor CPU coolers. The black, non-LED housing keeps the appearance neutral for internal mounting.

Ball bearing maintains steady airflow under

The ball bearing reduces friction compared with sleeve alternatives, allowing the blower to sustain its rated speed during long operating periods without the slowdown that heat buildup can cause. The 12 V, 0.2 A draw remains constant, so thermal performance stays predictable in enclosed projector or mini-PC chassis where airflow paths are restricted.

Replaces 60 mm sleeve-bearing blowers in projector

Builders swapping a worn 60 x 18 mm sleeve fan gain longer service life and consistent static pressure from the ball bearing. The upgrade is worthwhile when the original fan has become noisy or fails to move enough air through dense heatsink fins; it is not suited for builds needing larger frame sizes, PWM control or RGB lighting.

Privalumai

  • Compact 60 x 18 mm frame fits tight projector housings
  • Ball-bearing motor reduces friction for longer service life
  • 12 V .2 A draw keeps power demand low
  • Three-pin connector enables simple motherboard or controller hookup
  • Non-LED black design avoids light bleed in dark environments

Specifikacijos

BrandZyvpee
SeriesBD126018MB
ModelBD126018MB
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
Featuresdc blower
Dimensions60*18mm
Package Contentsrefer to title

Klausimai apie šią prekę

How loud is the Zyvpee BD126018MB when it runs continuously at 12 V and .2 A?

The fan uses a ball bearing and a 3-pin DC blower design rated for 12 V and .2 A, so it produces a steady airflow hum without PWM ramping.

What must my system already provide for the 3-pin connector on this 60×18 mm fan?

A standard three-pin 12 V header on the motherboard or a compatible fan controller supplies both power and a tachometer signal.

Will the 60 mm BD126018MB fit the mounting holes on my older CPU cooler that uses 60 mm fans?

Its 60×18 mm frame matches the common 60 mm square pattern, so it bolts directly onto most legacy coolers drilled for that spacing.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.