Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black 60 by 15 millimetre case fan with three-pin connector

Zyvpee

Zyvpee FBA06T24H 60x15mm DC24V 0.11A Ball 3-Pin Inverter Case Fan

SKU CH-5N1J-2NCRK

A 60 mm by 15 mm DC 24 V ball-bearing case fan with a three-pin connector for inverter cooling

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Ball bearing extends service life
  • 60 mm × 15 mm fits tight chassis slots
  • 24 V DC 0.11 A draws minimal power
  • Three-pin connector enables speed monitoring
  • Non-LED black frame suits stealth builds

60 mm Inverter Case Fan

The Zyvpee FBA06T24H is a 60 by 15 mm case fan built for inverter cooling. It runs on 24 V DC and draws 0.11 A through a three-pin power connector. The black, non-LED frame suits compact chassis that need directed airflow without lighting.

Ball Bearing and Three-Pin Connector

A ball bearing supports the rotor for consistent rotation over long operating periods. The three-pin connector delivers power and a tachometer signal so the motherboard or fan controller can monitor speed. Black blades and frame blend into standard server or industrial enclosures.

Replaces 6015-Size 24 V Fans

This unit fits the same 60 mm mounting pattern as legacy 6015 inverter fans. The jump is worth it when an existing fan has worn bearings or insufficient airflow for the inverter load. Builders who need PWM control or a different voltage should look elsewhere.

Privalumai

  • Ball bearing extends service life
  • 60 mm × 15 mm fits tight chassis slots
  • 24 V DC 0.11 A draws minimal power
  • Three-pin connector enables speed monitoring
  • Non-LED black frame suits stealth builds

Specifikacijos

BrandZyvpee
SeriesFBA06T24H
ModelFBA06T24H
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesInverter Cooling
Dimensions60*15mm

Klausimai apie šią prekę

What does the 3-pin connector limit for the 24 V 0.11 A fan?

The 3-pin connector supplies constant 24 V power at 0.11 A, so speed is fixed and there is no PWM control signal.

Will the 60 x 15 mm frame fit a standard 60 mm fan mount?

Yes, the 60 mm square frame with 15 mm thickness matches the common 60 mm mounting hole pattern used on cases and radiators.

How is the fan wired into a 24 V DC circuit?

Connect the red wire to +24 V, the black wire to ground, and the yellow wire to a tachometer input if RPM monitoring is needed.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.