Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 40mm square case fan with 10mm depth and shock-proof rubber corners

Zyvpee

Zyvpee FD124010LB 40x10mm 12V .055A 3-pin case fan

SKU CH-VBXJ-55H4Y

A compact 40 mm case fan with ball bearing, 12 V power and a 3-pin connector, supplied with a shock-proof rubber mat

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 40 mm frame fits tight chassis spaces
  • Low 0.055 A draw reduces power load
  • Ball bearing design extends operational life
  • 3-pin connector enables direct motherboard control
  • Shock-proof rubber mat dampens vibration noise

Compact 40 mm axial fan

The Zyvpee FD124010LB is a 40 by 40 by 10 mm DC axial fan designed for tight case clearances. It runs on 12 V and draws 0.055 A through a standard three‑pin connector. The ball bearing and non‑LED black frame suit builders who need a small, reliable airflow source without lighting.

Ball bearing thermals and low draw

The ball bearing keeps operating noise consistent over time while the 0.055 A current draw places minimal load on a 12 V rail. In normal use the fan spins steadily to move air through restricted spaces such as small form‑factor chassis or GPU heatsinks. No LED illumination means no extra power for lighting.

Shock‑proof rubber mounts included

Four rubber pads are supplied to isolate the fan from the case panel, reducing vibration transfer and installation noise. The three‑pin header allows basic speed reporting but not PWM control, so speed is managed by voltage regulation. The 40 mm footprint limits use to spots that accept this exact mounting pattern.

Privalumai

  • Compact 40 mm frame fits tight chassis spaces
  • Low 0.055 A draw reduces power load
  • Ball bearing design extends operational life
  • 3-pin connector enables direct motherboard control
  • Shock-proof rubber mat dampens vibration noise

Specifikacijos

BrandZyvpee
SeriesFD124010LB
ModelFD124010LB
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions40*40*10mm
Package Contentsrefer to title

Klausimai apie šią prekę

How do I install the 40x10mm fan and its shock-proof rubber mat correctly?

Mount the 40x10mm fan using the rubber mat between the frame and the case holes; the mat isolates vibration so screws should be snug but not over-tightened, which is the step most people get wrong.

What maintenance will the ball-bearing 12V .055A fan need later?

The ball bearing is sealed and not user-serviceable; when noise or speed drops noticeably after long use, replace the whole FD124010LB unit rather than trying to lubricate it.

What limit appears first when the 3-pin DC axial fan runs continuously?

Sustained operation at 12V .055A is limited by the ball bearing's thermal endurance; once internal grease degrades, rpm falls and noise rises, signalling end of life.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.