Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Small black square 30mm maglev case fan with two wires

Zyvpee

Zyvpee HA30101V3-0000-A99 30mm Maglev case fan

SKU CH-D2XN-X8X3M

A 30 mm maglev fan for CPU coolers running at up to 1600 RPM on 12 V power

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Fan Size30mm
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • Maglev bearing reduces friction for quiet operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 12 V 0.44 W draw keeps power use low
  • Two-pin connector simplifies motherboard hook-up
  • Non-LED black finish avoids unwanted light spill

30mm Maglev CPU Cooler Fan

The Zyvpee HA30101V3-0000-A99 is a 30mm square cooling fan designed for CPU coolers and other tight spaces. It uses a maglev bearing and runs at up to 1600 RPM while drawing 0.44W from a 12V supply. The two-wire connector provides power only. It has a black frame with no LED lighting.

Compact 12V Fan for Restricted Builds

This fan suits builders fitting a cooler into a small-form-factor chassis or replacing a 30mm unit on an existing heatsink. The 30mm by 10mm footprint fits where larger fans cannot. Buyers who need PWM speed control or a three-pin tachometer signal should look elsewhere. Anyone requiring higher airflow or a larger mounting pattern will need a different size.

Two-Pin 12V Power Connector

The only power interface is a two-pin header delivering 12V DC at 0.44W. No PWM wire and no speed-report wire are present, so the motherboard or controller cannot regulate or monitor RPM. Verify that your cooler or header accepts a two-pin 12V fan before ordering.

Privalumai

  • Maglev bearing reduces friction for quiet operation
  • 30 mm square frame fits tight CPU cooler spaces
  • 12 V 0.44 W draw keeps power use low
  • Two-pin connector simplifies motherboard hook-up
  • Non-LED black finish avoids unwanted light spill

Specifikacijos

BrandZyvpee
SeriesHA30101V3-0000-A99
ModelHA30101V3-0000-A99
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Fan Size30mm
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMini Cooling
Dimensions30*10MM

Klausimai apie šią prekę

Will the 30 mm frame and 2-pin connector fit the older CPU cooler I want to reuse?

The fan measures 30 mm square by 10 mm thick and uses a 2-pin power connector, matching coolers designed for that exact footprint.

How can I confirm the maglev bearing is running correctly once installed?

Listen for smooth, quiet rotation and verify the speed stays below 1600 RPM through BIOS or monitoring software.

Does the package include mounting screws or a 3-pin adapter, or must I buy them separately?

Only the 30 mm maglev fan with its two-wire lead is supplied; screws and any adapter are not included.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.