Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Black 60 x 25 mm case fan, 12 V 1.4 W, 2-pin connector, no LED

Zyvpee

Zyvpee KD1206PTB1 60 x 25 mm 12 V 1.4 W 2-pin case fan

SKU CH-XA7M-M9319

A 60 mm ball-bearing case fan delivering 12 V, 1.4 W CPU cooling through a 2-pin connector

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing TypeBall
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60 mm frame fits tight CPU coolers
  • Ball bearing runs quietly for longer life
  • Low 1.4 W draw keeps system power efficient
  • Simple 2-pin power plugs straight into motherboard
  • Non-LED black design suits clean professional builds

60 mm CPU cooler fan

The Zyvpee KD1206PTB1 is a 60 by 25 mm case fan designed for CPU cooler compatibility. It runs on 12 V power and draws 1.4 W through a 2-pin connector. The black non-LED frame suits builders who need compact airflow without lighting. Ball bearing construction supports continuous operation in tight spaces.

Ball bearing thermals and acoustics

Ball bearing operation provides steady rotation for consistent cooling performance. The 12 V 1.4 W rating indicates modest power draw during normal use. Fan speed follows voltage without PWM control so noise rises with load. The 60 mm footprint concentrates airflow directly over small heatsinks.

Fits 6025 mounts and frees larger slots

Mounting holes match the 6025 pattern found on many low-profile CPU coolers. Two-wire connection works with any 12 V header or adapter. The slim 25 mm depth leaves clearance for memory modules or VRM heatsinks nearby. Non-LED design avoids light bleed in windowed cases.

Privalumai

  • Compact 60 mm frame fits tight CPU coolers
  • Ball bearing runs quietly for longer life
  • Low 1.4 W draw keeps system power efficient
  • Simple 2-pin power plugs straight into motherboard
  • Non-LED black design suits clean professional builds

Specifikacijos

BrandZyvpee
SeriesKD1206PTB1
ModelKD1206PTB1
TypeCase Fan
CompatibilityCPU Cooler
Bearing TypeBall
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25MM

Klausimai apie šią prekę

How do I mount the 60 mm fan and what orientation mistake should I avoid?

Use the four corner screw holes to secure the 60 mm frame to the CPU cooler shroud or case mount; the step people get wrong is installing it so the airflow blows away from the heatsink instead of pulling air through the fins.

What maintenance will the ball-bearing fan need and when should I replace it?

Ball bearings do not require lubrication; replace the fan if bearing noise appears or if the 12 V 1.4 W motor no longer spins up to speed.

What is the first limit I will hit when running this fan continuously at 12 V?

The 1.4 W power draw and ball-bearing thermal rating set the practical ceiling; sustained operation at 12 V will eventually hit bearing wear before the motor overheats.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.