Zyvpee
Zyvpee KDE1206PTV1 60 mm Maglev Case Fan 12 V 1.7 W 3 Pin
60 mm maglev case fan runs below 1600 RPM at 12 V and 1.7 W with a 3-pin connector
- TypeCase Fan
- CompatibilityCPU Cooler
- Bearing TypeMaglev
- RPM<1600 RPM
- Power Connector3 Pin
- ColorBlack
- Maglev bearing reduces friction for quieter operation
- 12 V 1.7 W design keeps power draw low
- 60 mm by 25 mm frame fits tight CPU coolers
- Sub-1600 RPM speed balances airflow and noise
- Three-pin connector enables simple motherboard control
Compatibility and Use
This 60 mm maglev case fan is built for CPU cooler mounting where a slim 25 mm profile is required. It runs on a standard 12 V three-pin header and draws 1.7 W at speeds below 1600 RPM. The non-LED black frame keeps the build subtle while the magnetic levitation bearing reduces friction noise. It suits compact towers or small-form-factor chassis that accept 6025 mounting holes.
Who It Suits and Who Should Look Elsewhere
Builders refreshing a legacy CPU cooler or assembling a space-constrained system will appreciate the low power draw and maglev reliability. Users needing higher static pressure for dense radiators, PWM speed control, or RGB illumination should look elsewhere. The fixed three-pin connection prevents automatic curve tuning on modern motherboards. Buyers wanting larger airflow volumes or longer warranty coverage must consider other designs.
Deciding Specification
The 60 mm by 25 mm frame size is the single specification that decides fitment; verify your cooler or case accepts 6025 dimensions before purchase. The maglev bearing and sub-1600 RPM ceiling define the acoustic and thermal envelope. Three-pin voltage control limits speed regulation to DC mode only. No other specification overrides the physical footprint for compatibility.
Privalumai
- Maglev bearing reduces friction for quieter operation
- 12 V 1.7 W design keeps power draw low
- 60 mm by 25 mm frame fits tight CPU coolers
- Sub-1600 RPM speed balances airflow and noise
- Three-pin connector enables simple motherboard control
Specifikacijos
| Brand | Zyvpee |
|---|---|
| Series | KDE1206PTV1 |
| Model | KDE1206PTV1 |
| Type | Case Fan |
| Compatibility | CPU Cooler |
| Bearing Type | Maglev |
| RPM | <1600 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling |
| Dimensions | 60*25mm |
Klausimai apie šią prekę
How much power does the 12 V 1.7 W fan draw when it runs continuously at 1600 RPM?
The fan is rated at 1.7 W on a 12 V supply, so continuous operation at its maximum speed of <1600 RPM will draw roughly 1.7 W.
What header must my motherboard provide to run this 3-pin 60 mm fan?
A standard 3-pin fan header on the motherboard or fan controller is required; the fan has no PWM wire and no LED connector.
Will the 60*25 mm maglev unit fit the mounting holes on my older CPU cooler?
The fan measures 60 mm square by 25 mm thick with standard 60 mm mounting spacing, matching most legacy CPU coolers designed for 6025-size fans.
Taip pat šiame skyriuje
Kiti pirkėjai taip pat lygino
Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001046BTC
Yra sandėlyje