Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

A-Tech

A-Tech 128GB (8x16GB) DDR3 1066 ECC RDIMM 4Rx4 1.5V 240-Pin Server RAM

SKU CH-D68H-0N8TG

Eight 16 GB DDR3 1066 ECC registered DIMMs deliver 128 GB at 1.5 V for servers and workstations

  • Capacity128GB (8 x 16GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 128GB (8 x 16GB)

Speed DDR3 1066 (PC3 8500)

  • 128 GB total capacity from eight 16 GB modules for heavy workloads
  • DDR3 1066 MHz speed rated at PC3-8500 for server throughput
  • ECC registered design detects and corrects memory errors automatically
  • 4Rx4 quad-rank organisation maximises density per DIMM slot
  • 5 V standard DDR3 voltage ensures broad platform compatibility

128 GB DDR3 ECC kit for servers

This 128 GB kit contains eight 16 GB DDR3 1066 modules built to the PC3-8500R standard. Each stick is a registered DIMM with ECC and a 4Rx4 quad-rank layout. The kit targets servers and workstations that require registered ECC memory and will not function in desktop or laptop platforms.

Fits registered DDR3 slots

The modules use the 240-pin DDR3 DIMM form factor and operate at the standard 1.5 V. They must be installed in systems that explicitly support DDR3 registered ECC memory with quad-rank modules. Using them releases non-ECC or unbuffered slots for other configurations while providing error correction for critical workloads.

Steady throughput under continuous server loads

Rated at DDR3 1066 with CL7 latency, the memory delivers consistent bandwidth during extended multi-threaded tasks such as virtualization or database serving. Registered buffering and ECC maintain data integrity over long periods without the error accumulation seen in unbuffered alternatives.

Priekšrocības

  • 128 GB total capacity from eight 16 GB modules for heavy workloads
  • DDR3 1066 MHz speed rated at PC3-8500 for server throughput
  • ECC registered design detects and corrects memory errors automatically
  • 4Rx4 quad-rank organisation maximises density per DIMM slot
  • 5 V standard DDR3 voltage ensures broad platform compatibility

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 4Rx4 PC3-8500R
Capacity128GB (8 x 16GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the 4Rx4 quad-rank organisation limit the number of modules a memory controller can address?

Each module presents four ranks; most server platforms restrict the total rank count per channel, so eight 4Rx4 DIMMs may exceed that limit depending on the specific system.

What is the power draw and thermal output when all eight 1.5 V modules run continuously?

Operating at the standard 1.5 V DDR3 voltage, the kit draws typical registered DIMM power; sustained loads increase heat, so adequate airflow across the 240-pin slots is required.

Which server or workstation platforms accept 128 GB of DDR3 1066 ECC RDIMM memory?

Only systems that support DDR3 registered ECC DIMMs at 1066 MHz with quad-rank x4 modules can use this kit; verify the motherboard or chassis manual before purchase.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.