Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

A-Tech

A-Tech 128GB (8x16GB) DDR3L 1333 ECC RDIMM 4Rx4 1.35V 240-Pin Server RAM

SKU CH-D09C-SVXKQ

Eight 16 GB DDR3L 1333 ECC registered DIMMs deliver 128 GB at 1.35 V for server and workstation upgrades

  • Capacity128GB (8 x 16GB)
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 128GB (8 x 16GB)

  • 128 GB total capacity from eight 16 GB modules
  • DDR3L 1333 MHz speed for server workloads
  • ECC registered design detects and corrects data errors
  • Quad-rank 4Rx4 organisation maximises density per slot
  • 35 V low-voltage operation reduces power draw

128 GB DDR3L ECC RDIMM kit

This 128 GB kit contains eight 16 GB DDR3L 1333 MHz registered DIMMs built for servers and workstations that require ECC memory. Each module uses a 4Rx4 quad-rank organisation and operates at 1.35 V low voltage. The 240-pin form factor fits only systems designed for DDR3 registered memory.

Quad-rank 4Rx4 registered design

The 4Rx4 quad-rank layout is the single specification that determines compatibility with your server or workstation memory controller. Systems that accept only single-rank or dual-rank modules will not recognise these DIMMs. Verify the platform documentation for 4Rx4 support before installation.

Sustained ECC workload stability

Under continuous load the registered buffer and on-die ECC maintain data integrity across all eight modules without the error accumulation seen in unbuffered memory. The 1.35 V operation reduces thermal stress during extended compute tasks compared with standard 1.5 V DDR3. CL9 latency at 1333 MHz delivers consistent throughput for virtualisation and database workloads.

Priekšrocības

  • 128 GB total capacity from eight 16 GB modules
  • DDR3L 1333 MHz speed for server workloads
  • ECC registered design detects and corrects data errors
  • Quad-rank 4Rx4 organisation maximises density per slot
  • 35 V low-voltage operation reduces power draw

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 4Rx4 PC3L-10600R
Capacity128GB (8 x 16GB)
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the 1333 MHz rating run at that speed in my server?

The modules are rated for 1333 MHz (PC3L-10600). Actual operating speed depends on the server's memory controller and populated DIMM slots; the system will negotiate the highest common speed supported by the CPU and configuration.

What does PC3L-10600R mean for compatibility?

PC3L-10600R identifies DDR3L registered ECC DIMMs at 1333 MHz with a 1.35 V baseline. The 'R' confirms registered buffering required by server chipsets; desktop or laptop boards that expect unbuffered UDIMMs will not accept these modules.

Do the 240-pin DIMMs fit standard server DIMM slots?

Yes. Each 16 GB module uses the 240-pin DDR3/DDR3L DIMM form factor with the registered notch position, so they install directly into compatible server and workstation DIMM slots.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.