Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green 204-pin DDR3 SO-DIMM modules, 16GB kit

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333 ECC SODIMM 204-Pin 1.5V laptop RAM

SKU CH-5EEH-6BK4C

16 GB dual-channel DDR3 ECC SODIMM kit running at 1333 MHz with CL9 latency for compatible laptops and microservers

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes

Capacity 16GB (2 x 8GB)

Speed DDR3 1333 (PC3 10600)

CAS Latency CL9

  • ECC protection prevents data errors in critical workloads
  • 16 GB dual-channel kit with two 8 GB modules
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V JEDEC standard voltage ensures broad compatibility
  • 204-pin SO-DIMM form factor fits supported laptop slots

16GB DDR3 ECC SODIMM kit

This 16GB kit contains two 8GB DDR3 1333 modules in the 204-pin SO-DIMM form factor. It runs at 1.5V with CL9 latency and provides ECC error correction for data integrity.

For ECC-capable laptops and microservers

Suits owners of mobile workstations, microservers or NAS units that specifically require unbuffered ECC SODIMM memory. Buyers whose systems only accept non-ECC modules or a different DDR generation cannot use this kit.

Dual-channel upgrade for compatible DDR3 platforms

The matched pair enables dual-channel operation on boards wired for it, increasing memory bandwidth for multitasking. Installation requires a free SO-DIMM slot pair and a platform that supports ECC unbuffered DDR3 at 1333 MHz.

Priekšrocības

  • ECC protection prevents data errors in critical workloads
  • 16 GB dual-channel kit with two 8 GB modules
  • DDR3 1333 speed matches PC3-10600 system requirements
  • 5 V JEDEC standard voltage ensures broad compatibility
  • 204-pin SO-DIMM form factor fits supported laptop slots

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 ECC SODIMM
ModelA-Tech 8GB 2Rx8 PC3-10600 ECC SODIMM
Part NumberNE-SS-0592
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesECC SODIMM
Recommend UseAMD & Intel Compatible
OptionECC SODIMM

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does this kit require a laptop that already supports DDR3 ECC unbuffered SO-DIMM memory?

Yes, the system must accept DDR3 ECC unbuffered SO-DIMM modules at 1333 MHz and 1.5 V.

Will these 204-pin modules work in a notebook that currently uses non-ECC DDR3 SO-DIMMs?

Only if the notebook's chipset and BIOS explicitly support ECC unbuffered DDR3 SO-DIMMs; otherwise the ECC function will not operate.

How can I confirm the dual-channel kit is running at 1333 MHz with ECC active after installation?

Check the BIOS memory information or a tool such as CPU-Z; it should show 16 GB total, DDR3-1333, CL9, 1.5 V, and ECC enabled.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.