Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Two green circuit boards with black chips and gold contacts

A-Tech

A-Tech 16GB (2x8GB) DDR3 1333MHz SODIMM CL9 1.5V laptop RAM

SKU CH-A219-615AA

16 GB dual-channel DDR3 SODIMM kit running at 1333 MHz with CL9 latency and 1.5 V operation

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 16GB (2 x 8GB)
  • 8GB
  • 16 GB dual-channel kit boosts multitasking with two 8 GB modules
  • DDR3 1333 MHz speed accelerates loading and responsiveness
  • CL9 latency at 1.5 V delivers stable, efficient operation
  • 204-pin SODIMM form factor fits compatible DDR3 laptops and AIOs
  • Rigorously tested non-ECC unbuffered modules ensure reliable performance

What this kit is and who it is for

This 16GB kit contains two 8GB DDR3 SODIMM modules rated at 1333MHz with CL9 latency and 1.5V operation. It is built for notebook, laptop and all-in-one systems that accept 204-pin DDR3 memory and benefit from a dual-channel configuration.

Who it suits and who should look elsewhere

The kit suits owners of DDR3-capable portable or compact computers needing a straightforward capacity increase. Systems that require ECC, registered modules, a different pin count, or a voltage other than 1.5V will not be compatible with this memory.

The specification that decides fit

The modules are 204-pin DDR3 SO-DIMMs running at DDR3 1333 (PC3-10600) with a CL9 timing and 1.5V supply. Verify that your device supports this exact speed, voltage and form factor before purchasing.

Priekšrocības

  • 16 GB dual-channel kit boosts multitasking with two 8 GB modules
  • DDR3 1333 MHz speed accelerates loading and responsiveness
  • CL9 latency at 1.5 V delivers stable, efficient operation
  • 204-pin SODIMM form factor fits compatible DDR3 laptops and AIOs
  • Rigorously tested non-ECC unbuffered modules ensure reliable performance

Specifikācijas

BrandA-Tech
SeriesA-Tech DDR3 Laptop
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Does the CL9 latency at 1333 MHz become a bottleneck during long rendering sessions?

The kit runs at DDR3 1333 MHz with CL9 timing, so latency stays consistent at that speed; sustained workloads are limited by the 1333 MT/s data rate rather than the CAS figure alone.

How much heat and power do the 1.5 V dual-rank modules produce when the laptop runs all day?

Each 8 GB module operates at 1.5 V without buffering; dual-rank 2Rx8 organisation draws standard DDR3 power and generates typical SO-DIMM heat for continuous operation.

My notebook only has a single 204-pin DDR3 slot — can I use just one stick from this kit?

The kit contains two 204-pin DDR3 SO-DIMMs designed for dual-channel use; a single module will function in a lone slot but you lose the dual-channel bandwidth advantage.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.