Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green 240-pin DDR3 RDIMM module with black chips and silver label

A-Tech

A-Tech 16GB DDR3 1066MHz ECC RDIMM 4Rx4 Server Memory

SKU CH-FPE7-S53YH

16 GB DDR3 1066 MHz ECC registered server DIMM with 4Rx4 organisation and 1.5 V operation

  • Capacity16GB
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR3 1066MHz ECC RDIMM expands server capacity
  • CL7 latency at 1.50V speeds up data access
  • 4Rx4 registered design stabilises heavy multi-task workloads
  • 240-pin DIMM fits Kingston KTD-PE310Q/16G and KVR1066D3Q4R7S/16G slots
  • Major-brand chipset tested for dependable server operation

Capacity and Compatibility

This 16GB DDR3 module runs at 1066MHz with PC3-8500 rating and CL7 latency. It uses a registered ECC design with 4Rx4 organisation and operates at 1.50V. The 240-pin DIMM is built as a direct replacement for several Kingston server part numbers including KTM-SX310Q/16G and KVR1066D3Q4R7S/16G.

Build Integration

Registered ECC memory requires a server or workstation motherboard that supports buffered DIMMs and error correction. The single 16GB stick occupies one 240-pin slot and leaves remaining channels open for additional modules up to the platform limit. Standard 1.5V DDR3 voltage means no special power regulation is needed beyond what the board already provides.

Sustained Load Behaviour

ECC circuitry detects and corrects single-bit errors during continuous operation, preventing data corruption in long-running workloads. Registered buffering reduces electrical load on the memory controller, helping maintain signal integrity when multiple modules are populated. Major-brand chips and factory testing aim to deliver consistent throughput without throttling under extended use.

Priekšrocības

  • 16GB DDR3 1066MHz ECC RDIMM expands server capacity
  • CL7 latency at 1.50V speeds up data access
  • 4Rx4 registered design stabilises heavy multi-task workloads
  • 240-pin DIMM fits Kingston KTD-PE310Q/16G and KVR1066D3Q4R7S/16G slots
  • Major-brand chipset tested for dependable server operation

Specifikācijas

BrandA-Tech
Capacity16GB
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Jautājumi par šo preci

How many ranks does the 16GB DDR3 1066MHz module present to the memory controller?

The module is organised as 4Rx4, meaning four ranks of x4 chips, so the memory controller sees four ranks per DIMM.

What voltage does the registered ECC DIMM draw when the server runs continuously?

It operates at the standard DDR3 voltage of 1.50V, so power draw stays at the normal level for DDR3 registered modules under sustained load.

Which motherboard slot type is required to install this 240-pin registered DIMM?

A DDR3 RDIMM socket with 240 pins is needed; the system must support registered ECC memory for the module to function.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.