Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 16GB DDR3 1600MHz ECC RDIMM 2Rx4 1.5V Server Memory

SKU CH-3NJT-P7RQQ

16 GB DDR3 1600 MHz ECC registered DIMM for server and workstation upgrades

  • Capacity16GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR3 ECC RDIMM boosts server capacity
  • 1600 MHz PC3-12800 speed supports demanding workloads
  • Registered 2Rx4 design improves signal integrity
  • 5 V standard voltage ensures broad compatibility
  • 240-pin DIMM fits DDR3 server slots

Capacity and server fit

This is a 16GB DDR3 ECC registered DIMM built for servers and workstations that require error correction and signal buffering. It replaces Elpida EBJ17RG4BBWD-GN-F and EBJ17RG4BFWA-GN-F modules in compatible systems. Buyers needing non-ECC unbuffered memory for desktop boards cannot use this module.

DDR3 interface limits

The module runs at DDR3 1600 (PC3-12800) with CL11 latency at the standard 1.5V voltage. DDR3 platforms cap memory bandwidth and maximum capacity per channel well below later generations, so total system memory ceilings are lower. Systems locked to slower DDR3 speeds will downclock this module automatically.

Installation notes

The 240-pin DIMM seats in a standard DDR3 registered DIMM slot; the key notch prevents backward insertion. Registered modules must be used in matched sets or approved configurations per the system vendor, otherwise the server may fail to post or disable the slot. Always verify the qualified vendor list before installing.

Priekšrocības

  • 16 GB DDR3 ECC RDIMM boosts server capacity
  • 1600 MHz PC3-12800 speed supports demanding workloads
  • Registered 2Rx4 design improves signal integrity
  • 5 V standard voltage ensures broad compatibility
  • 240-pin DIMM fits DDR3 server slots

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Elpida
ModelEBJ17RG4BBWD-GN-F, EBJ17RG4BFWA-GN-F
Capacity16GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesEBJ17RG4BBWD-GN-F, EBJ17RG4BFWA-GN-F

Jautājumi par šo preci

Should I pick the 16 GB DDR3-1600 ECC RDIMM or a different capacity for my server?

Choose this 16 GB module when your system requires a registered DIMM with ECC and 2Rx4 organisation at the DDR3-1600 speed grade; match the total capacity to your board's maximum and slot count.

What does the DDR3-1600 (PC3-12800) rating mean once the module is installed?

The memory will run at 1600 MT/s with CL11 timing at 1.5 V, providing the standard DDR3-1600 transfer rate for registered ECC server platforms.

Does the 240-pin DDR3 RDIMM interface limit the speed or capacity I can use?

The 240-pin registered DIMM form factor supports DDR3-1600 operation; your motherboard's chipset and BIOS determine the maximum usable speed and total capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.