BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
A-Tech
16 GB DDR3L 1333 ECC registered DIMM, 2Rx4, 1.35 V, 240-pin, compatible with HP part numbers 647653-081, 647881-B21, 647883-S21, 687463-001
This A-Tech module delivers 16GB of DDR3L 1333 memory with ECC and registered buffering. It operates at 1.35V with a CL9 latency and a 2Rx4 rank configuration. The 240-pin DIMM is built as a direct replacement for HP part numbers 647653-081, 647881-B21, 647883-S21 and 687463-001. It targets administrators upgrading compatible HP server or workstation platforms.
This module fits systems that require registered ECC DDR3L DIMMs at the 1333 speed grade. It will not work in platforms that accept only unbuffered UDIMMs, non-ECC memory, or different DDR generations. Builders needing higher densities per slot, faster DDR3 speeds, or consumer-grade memory should select a different product.
The 2Rx4 organisation and registered ECC design are the decisive compatibility factors for the target HP platforms. The module uses major-brand chips tested to PC3L-10600 specifications. Verify that your system's memory list includes these exact electrical and mechanical characteristics before ordering.
| Brand | A-Tech |
|---|---|
| Capacity | 16GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The PC3L-10600 rating caps the module at 1333 MT/s and CL9 timing, so the server will run it at that speed even if the platform supports faster DDR3L.
It requires a standard 240-pin DDR3 DIMM slot with the DDR3 key notch; the registered design adds a register chip but does not change the physical connector.
Align the notch, press firmly until both ejector clips click shut, then verify in BIOS that the channel shows 16 GB at 1.35 V with ECC active — skipping the BIOS check is the common mistake.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?