Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR3L server memory module with gold edge connectors and black chips on both sides

A-Tech

A-Tech 16GB DDR3L 1600 ECC RDIMM 2Rx4 1.35V server RAM

SKU CH-RHH2-NTTG0

16GB DDR3L 1600 ECC registered DIMM with 2Rx4 organisation and 1.35V low-voltage operation

  • Capacity16GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption in servers
  • registered DIMM design supports heavy multi-module loads
  • 16 GB capacity expands memory for demanding workloads
  • DDR3L 1600 speed at 1.35 V reduces power draw
  • 240-pin form factor fits compatible server boards

16GB DDR3L ECC RDIMM for Servers

This 16GB DDR3L 1600 ECC registered DIMM is built for servers and workstations that require error-correcting, low-voltage memory. It runs at 1.35V with CL11 latency and a 2Rx4 organisation. The 240-pin module replaces Crucial CT2K16G3ERVLD4160B and CT16G3ERVLD4160B parts. Systems needing registered ECC DDR3L at this density will use it directly.

Suits DDR3L registered ECC platforms only

Administrators upgrading or repairing DDR3L servers that accept 16GB registered ECC modules will find this a direct match. It is not for desktops or laptops that use unbuffered non-ECC memory. It is not for systems limited to 1.5V DDR3 or to lower-density registered DIMMs. Buyers who need 262-pin SO-DIMM form factors or different voltage standards must select a different module.

2Rx4 registered ECC at 1.35V decides fit

The single specification that determines compatibility is the combination of registered ECC operation, 2Rx4 rank structure, and 1.35V DDR3L signalling. Your motherboard and CPU must explicitly support registered ECC DDR3L at this rank configuration. Verify the qualified vendor list before purchase; an incorrect match will prevent the system from posting.

Priekšrocības

  • ECC protection prevents data corruption in servers
  • registered DIMM design supports heavy multi-module loads
  • 16 GB capacity expands memory for demanding workloads
  • DDR3L 1600 speed at 1.35 V reduces power draw
  • 240-pin form factor fits compatible server boards

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for Crucial
ModelCT2K16G3ERVLD4160B, CT16G3ERVLD4160B
Capacity16GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesCT2K16G3ERVLD4160B, CT16G3ERVLD4160B

Jautājumi par šo preci

Does my server need DDR3L slots and ECC RDIMM support to use this 16GB module?

Yes — the module is DDR3L 1600 ECC RDIMM, so the motherboard must accept DDR3L registered ECC DIMMs at 1.35V.

Can I mix this 2Rx4 module with existing 1Rx4 DDR3L ECC RDIMMs in the same channel?

Mixing ranks is possible if the platform supports it; the module runs at DDR3L 1600 CL11 1.35V, so all DIMMs will operate at the lowest common speed and voltage.

How can I confirm the module is running at DDR3 1600 CL11 after installation?

Check the BIOS or OS memory report for 1600 MT/s speed, CL11 timings, 1.35V voltage, and registered ECC status.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.