Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green rectangular DDR4 DIMM circuit board with black chips and gold contacts

A-Tech

A-Tech 16GB DDR4 3200 CL22 Desktop Memory for HP L82038-001

SKU CH-D9QQ-57HKF

A 16 GB DDR4 3200 desktop DIMM with CL22 latency and 1.2 V operation, built as a compatible replacement for HP L82038-001

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • Tested Frequency3200
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity lets you run heavier workloads
  • 3200 MHz DDR4 speed matches PC4-25600 spec
  • CL22 latency at 1.20 V standard voltage
  • 288-pin DIMM form factor fits desktop slots
  • Tested compatible replacement for HP L82038-001

A-Tech 16GB DDR4 3200 Desktop Memory

This 16GB DDR4 module runs at 3200MHz with CL22 latency and 1.2V operation. It is an unbuffered non-ECC DIMM built as a compatible replacement for HP part L82038-001. The single stick uses major brand chips and carries a lifetime warranty from A-Tech.

Check your motherboard supports DDR4 3200

Verify the board accepts 288-pin DIMMs and can run at 1.2V without requiring registered or ECC memory. Confirm the system has a free slot for a 1x16GB configuration and that the BIOS will recognise the 2Rx8 organisation. Consult the HP service guide for L82038-001 to ensure exact compatibility.

Fits a standard 288-pin DDR4 slot

The stick needs no heat spreader and draws standard DDR4 voltage, leaving headroom for additional sticks if slots remain. It frees the system from lower-capacity or slower memory by providing a tested 3200MHz replacement. Installation is a simple press-in upgrade for supported HP desktops.

Priekšrocības

  • 16 GB capacity lets you run heavier workloads
  • 3200 MHz DDR4 speed matches PC4-25600 spec
  • CL22 latency at 1.20 V standard voltage
  • 288-pin DIMM form factor fits desktop slots
  • Tested compatible replacement for HP L82038-001

Specifikācijas

BrandA-Tech
SeriesCompatible Replacement for HP
ModelL82038-001
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
Tested Frequency3200
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesL82038-001
Recommend UseCompatible Replacement for HP L82038-001

Jautājumi par šo preci

Will this module fit my HP desktop that uses part number L82038-001?

Yes, it is built as a compatible replacement for HP L82038-001 and uses the standard 288-pin DDR4 DIMM form factor.

My board runs at 3200 MHz with CL22 latency — will this stick run at that speed without changes?

The module is rated for DDR4 3200 at CL22 and 1.20 V, so it will operate at those settings on a compatible motherboard.

I have two free DIMM slots; can I add this 16 GB stick alongside my existing memory?

It is a single 16 GB unbuffered non-ECC module, so it can be installed in an open slot provided your platform supports the total capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.